+- Jellyfin Forum (https://forum.jellyfin.org)
+-- Forum: Support (https://forum.jellyfin.org/f-support)
+--- Forum: Troubleshooting (https://forum.jellyfin.org/f-troubleshooting)
+--- Thread: Transcoding setup issues (/t-transcoding-setup-issues)
RE: Transcoding setup issues - Deegee88 - 2024-03-13
Sure, here: https://sourceb.in/OhBc66Qjsu
RE: Transcoding setup issues - TheDreadPirate - 2024-03-13
Can you open a shell for the container and run "ls -l /dev/dri" ?
Also, did you pass the "render" group ID into the container?
https://jellyfin.org/docs/general/administration/hardware-acceleration/intel/#official-docker
RE: Transcoding setup issues - Deegee88 - 2024-03-13
https://sourceb.in/IzJaHC2nWX
RE: Transcoding setup issues - TheDreadPirate - 2024-03-13
Do you have multiple GPUs? Your Xeon doesn't have an iGPU. As long as they are both the same model it shouldn't matter.
Can you provide screenshots of the Docker UI in TrueNAS for the jellyfin container?
RE: Transcoding setup issues - Deegee88 - 2024-03-13
Yes - i have an Nvidia p2000 (i believe) and my A380.
Yes - how is best to share screenshots on this forum?
I've worked it out! I've attached to this message
RE: Transcoding setup issues - TheDreadPirate - 2024-03-13
If you click on "Preview Post" or "New Reply" you will get the full reply editor and will be able to attach images.
RE: Transcoding setup issues - Deegee88 - 2024-03-13
I managed to attach it to the message above
RE: Transcoding setup issues - TheDreadPirate - 2024-03-13
Remove the AMD and NVIDIA GPUs in the container config. Just pass in the Intel GPU.
RE: Transcoding setup issues - Deegee88 - 2024-03-13
I have just tried that and unfortunately it wont let me, I must select something in those boxes.
So I just select the option that says "Allocate 0"
I think it's a limitation of Truenas Scale...i've tried installing Portainer to run it that way but it only allows me to use Kubernetes and not docker.
I could try to run this in a VM but when i've tried in the past i've struggled to get the VM to talk to the Truenas server so I can access the storage volumes.
RE: Transcoding setup issues - TheDreadPirate - 2024-03-13
You can't click on the "X" at the end and just remove the AMD and Nvidia GPU? Weird that you HAVE to pass them all in. There's gotta be a way to just pass in the Intel GPU. What happens when the Intel GPU is "0" instead of "1"? I am pretty sure that as configured Jellyfin is trying to use the AMD GPU at renderD128.