+- Jellyfin Forum (https://forum.jellyfin.org)
+-- Forum: Support (https://forum.jellyfin.org/f-support)
+--- Forum: Troubleshooting (https://forum.jellyfin.org/f-troubleshooting)
+--- Thread: How to add new hard drive ubuntu (/t-how-to-add-new-hard-drive-ubuntu)
Pages:
1
2
RE: How to add new hard drive ubuntu - theguymadmax - 2024-10-25
(2024-10-25, 04:07 PM)TheDreadPirate Wrote: It does provide the same UUID.
Code:chris@rat-trap:~$ sudo fdisk -x /dev/sdd ; echo "***************" ; sudo blkid /dev/sdd1
Disk /dev/sdd: 2.73 TiB, 3000592982016 bytes, 5860533168 sectors
Disk model: WDC WD30EFRX-68N
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Disk identifier: 524790FD-E3D1-4F80-B9A1-F0582FA72E06
First usable LBA: 34
Last usable LBA: 5860533134
Alternative LBA: 5860533167
Partition entries starting LBA: 2
Allocated partition entries: 128
Partition entries ending LBA: 33
Device Start End Sectors Type-UUID UUID Name Attrs
/dev/sdd1 2048 5860533134 5860531087 0FC63DAF-8483-4772-8E79-3D69D8477DE4 63C1787F-E1A3-B34A-AE05-EB66F240E17D
***************
/dev/sdd1: UUID="ec176098-2c7a-471d-9bd2-2c67b954387a" BLOCK_SIZE="4096" TYPE="ext4" PARTUUID="63c1787f-e1a3-b34a-ae05-eb66f240e17d"
The UUID for the partition is the same value, "63C1787F-E1A3-B34A-AE05-EB66F240E17D".
The UUID from blkid is "ec176098-2c7a-471d-9bd2-2c67b954387a" which is not the same as
"63C1787F-E1A3-B34A-AE05-EB66F240E17D". fstab wants that uuid.
RE: How to add new hard drive ubuntu - TheDreadPirate - 2024-10-25
Having said that, I think I will update my guide to use blkid since it uses the more clearly named "PARTUUID".
RE: How to add new hard drive ubuntu - Doom69 - 2024-10-25
(2024-10-25, 04:32 PM)TheDreadPirate Wrote: The "PARTUUID" for blkid is the same as the UUID for fdisk -x. Just lower case for blkid.Can you elaborate on what should I do?
Code:
Disk /dev/loop0: 4 KiB, 4096 bytes, 8 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop1: 74,21 MiB, 77819904 bytes, 151992 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop2: 12,32 MiB, 12922880 bytes, 25240 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop3: 266,63 MiB, 279584768 bytes, 546064 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop4: 496,98 MiB, 521121792 bytes, 1017816 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop5: 568 KiB, 581632 bytes, 1136 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop6: 91,69 MiB, 96141312 bytes, 187776 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop7: 452 KiB, 462848 bytes, 904 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/sda: 465,76 GiB, 500107862016 bytes, 976773168 sectors
Disk model: ST3500418AS
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0xc979c979
Device Boot Start End Sectors Size Id Type
/dev/sda1 2048 976769023 976766976 465,8G 83 Linux
Disk /dev/sdb: 465,76 GiB, 500107862016 bytes, 976773168 sectors
Disk model: WDC WD5000AAKX-6
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0xb39fb39f
Device Boot Start End Sectors Size Id Type
/dev/sdb1 2048 976769023 976766976 465,8G 83 Linux
Disk /dev/sdc: 465,76 GiB, 500107862016 bytes, 976773168 sectors
Disk model: WDC WD5000AAKX-0
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: ED97E270-10F2-44FC-8D4D-7D237FD9515C
Device Start End Sectors Size Type
/dev/sdc1 2048 4095 2048 1M BIOS boot
/dev/sdc2 4096 1054719 1050624 513M EFI System
/dev/sdc3 1054720 5249023 4194304 2G Linux swap
/dev/sdc4 5249024 9443327 4194304 2G Solaris boot
/dev/sdc5 9443328 976773134 967329807 461,3G Solaris root
Disk /dev/loop8: 40,43 MiB, 42393600 bytes, 82800 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop9: 55,36 MiB, 58052608 bytes, 113384 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop10: 38,83 MiB, 40714240 bytes, 79520 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop11: 321,1 MiB, 336699392 bytes, 657616 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop12: 74,25 MiB, 77852672 bytes, 152056 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytesI have 3 500GB drives I plan to use for storage (1 works already, and 2 I want to configure so they work too)
RE: How to add new hard drive ubuntu - TheDreadPirate - 2024-10-25
I'm assuming /dev/sdc is the drive you are already using.
So the remaining two drives are /dev/sda and /dev/sdb.
Code:
blkid /dev/sda1 /dev/sdb1From that, make note of the PARTUUID for each.
Then
Code:
sudo nano /etc/fstabAnd add the follow to the bottom of the file.
Code:
UUID={insert UUID for /dev/sda1} /mnt/drive1 ext4 defaults 0 0
UUID={insert UUID for /dev/sdb1} /mnt/drive2 ext4 defaults 0 0Replace "drive1" and "drive2" with whatever folder name you want to use. Whatever name you choose, you need to create the folder in /mnt.
Code:
sudo mkdir -p /mnt/drive1 /mnt/drive2Then you can use "sudo mount -a" to mount your drives automatically.