+- Jellyfin Forum (https://forum.jellyfin.org)
+-- Forum: Support (https://forum.jellyfin.org/f-support)
+--- Forum: Troubleshooting (https://forum.jellyfin.org/f-troubleshooting)
+--- Thread: Jellyfin not starting up after upgrading to 10.9.0 (/t-jellyfin-not-starting-up-after-upgrading-to-10-9-0)
RE: Jellyfin not starting up after upgrading to 10.9.0 - TheDreadPirate - 2024-05-16
This PR MIGHT be related to your issue.
https://github.com/jellyfin/jellyfin/pull/11587
Not entirely sure.
RE: Jellyfin not starting up after upgrading to 10.9.0 - gingerbreadassassin - 2024-05-23
(2024-05-12, 10:24 PM)Sarinz Wrote: I don't know what to do.. I have tried setting the image version to 10.8.13, but that gave many errors, It seemed that 10.9.0 update have changed a lot of things.
This thread from post #3 and on basically has nothing to do with the OP's problem. I ran into this issue running jellyfin via truecharts and a failed upgrade via heavyscript from 10.8.13 -> 10.9.3. The clue is this line:
Code:
[21:41:36] [INF] Library database backed up to /var/lib/jellyfin/data/library.db.bak40If you look in the
/var/lib/jellyfin/data/ directory, you'll see a bunch of library.db.bak* files, though I believe the corruption (if it really is corrupt and not just a failure in the migration logic or I attempted too great a version jump) is actually in the original library.db. I solved my issue by moving the library.db* files to a backup directory. Jellyfin was then able to start, but it did have to rebuild the library. Mine did this automatically, and was done in less than 5 minutes. Here's roughly the commands I used:
Code:
$ cd /var/lib/jellyfin/data
$ mkdir librarybak
$ mv library.db* librarybak/Hope others find this useful.