Jellyfin Forum
CPU will 4 cores be enough for direct streaming - Printable Version

+- Jellyfin Forum (https://forum.jellyfin.org)
+-- Forum: Support (https://forum.jellyfin.org/f-support)
+--- Forum: General Questions (https://forum.jellyfin.org/f-general-questions)
+--- Thread: CPU will 4 cores be enough for direct streaming (/t-cpu-will-4-cores-be-enough-for-direct-streaming)

Pages: 1 2


CPU will 4 cores be enough for direct streaming - Bladefin - 2026-06-05

Will a CPU that has 4 cores be enough for direct streaming 1080p and 4k.

I use Dave750 for downmixing to stereo, the volume is just right, I get a coloured banding on some 1080p films, if I force a full transcode I don't get the banding, it's weird because when I do a force transcode it's still h264 so I'm not actually reducing the video quality.

The CPU (Tiger lake) I have right now is two cores.


RE: CPU will 4 cores be enough for direct streaming - TheDreadPirate - 2026-06-05

It depends on how many users you have and what model CPU. 4 cores from a CPU from 2011 isn't going to cut it, but 4 cores from 2026 will.

However, hardware accelerated transcoding is always preferable. Most modern (Skylake and later) consumer Intel CPUs have an iGPU with Quick Sync with decent codec support and performance. Tiger Lake has pretty decent codec support. As long as you enable hardware transcoding, it should do a pretty good job.

What you're seeing with the banding likely has to do with color depth of the source video and how it was encoded. I'd have to see what ffmpeg command parameters are being used for your transcode to explain the smoothing of the color bands.


RE: CPU will 4 cores be enough for direct streaming - Bladefin - 2026-06-05

(2026-06-05, 07:25 PM)TheDreadPirate Wrote: It depends on how many users you have and what model CPU.  4 cores from a CPU from 2011 isn't going to cut it, but 4 cores from 2026 will.

However, hardware accelerated transcoding is always preferable.  Most modern (Skylake and later) consumer Intel CPUs have an iGPU with Quick Sync with decent codec support and performance.  Tiger Lake has pretty decent codec support.  As long as you enable hardware transcoding, it should do a pretty good job.

What you're seeing with the banding likely has to do with color depth of the source video and how it was encoded.  I'd have to see what ffmpeg command parameters are being used for your transcode to explain the smoothing of the color bands.

In certain scenes this is what I get when there is a lot going on in the scene but it doesn't happen all the time,and only on certain movies.

It's just one user at the moment.

I'm getting a Beelink N150 soon.

Direct Play is absolutely fine on those films.

The weird colour pops up only for a second.

Does direct streaming use the CPU and not the GPU?


RE: CPU will 4 cores be enough for direct streaming - TheDreadPirate - 2026-06-05

When you said "coloured banding", that is usually used to refer to scenes with gradients that don't smoothly transition through the gradient color range. That screenshot looks like corruption. I don't know why, but ffmpeg may have some error correcting mechanisms that fixes it when transcoded.

Direct play = No modification to audio/video/subtitles/container, client plays original file as is.
Remux = Client does not support container, audio/video/subtitles are NOT modified but sent in a different container.
Direct stream = Audio is transcoded, video/subtitles are not modified.
Transcode = Video is transcoded, audio may or may not be transcoded.

If you only have one user, I'm assuming yourself, Tiger Lake is perfectly fine. And so is the N150.


RE: CPU will 4 cores be enough for direct streaming - Bladefin - 2026-06-05

Sorry my mistake in using the wrong word to describe it, that's what I thought it might of got corrupted somehow when the audio is getting transcoded, first I thought it might be a bad disc I had,but then I thought it can't be if it direct plays without that colour corruption.

Stopping the film and forcing it to do a full transcode (video and audio) or remux always comes out fine. It's only when the audio gets changed.

Yes it's just me the one user.


RE: CPU will 4 cores be enough for direct streaming - Bladefin - 2026-06-05

Seems to have happened to someone else but sadly no definite answer to solve it.

https://www.reddit.com/r/jellyfin/comments/13yrgbz/weird_colors_banding_on_quick_scenes/


RE: CPU will 4 cores be enough for direct streaming - TheDreadPirate - 2026-06-06

The person stating that there is a missing key frame may be correct. When re-encoding/transcoding ffmpeg may be using frames prior to the missing key frame to compensate.


RE: CPU will 4 cores be enough for direct streaming - Bladefin - 2026-06-06

(2026-06-06, 04:56 PM)TheDreadPirate Wrote: The person stating that there is a missing key frame may be correct.  When re-encoding/transcoding ffmpeg may be using frames prior to the missing key frame to compensate.

Thanks,so what would be making the missing key frame, because it's fine if it's direct playing.


RE: CPU will 4 cores be enough for direct streaming - TheDreadPirate - 2026-06-06

Whatever the source of your file either didn't have it or there was an error during the creation of the file.


RE: CPU will 4 cores be enough for direct streaming - Bladefin - 2026-06-06

(2026-06-06, 06:21 PM)TheDreadPirate Wrote: Whatever the source of your file either didn't have it or there was an error during the creation of the file.

Ok that would explain it,but how come it's fine if I don't downmix, surely if it was missing or there was a error then it would show up when it's direct playing.