TVHeadend Recording Issue - Printable Version +- Jellyfin Forum (https://forum.jellyfin.org) +-- Forum: Support (https://forum.jellyfin.org/f-support) +--- Forum: Troubleshooting (https://forum.jellyfin.org/f-troubleshooting) +--- Thread: TVHeadend Recording Issue (/t-tvheadend-recording-issue) |
TVHeadend Recording Issue - bobsey - 2023-07-12 Hi I am trying to migrate my Jellyfin set-up to a new server. Currently it runs on an Odroid HC4, and I am trying to migrate to an Odriod N2+. Both set-ups are configured the same: Armbian OS running on an SD Card, Jellyfin is running a docker container, with the docker config files on an SSD (attached by SATA port on the HC4 and USB on the N2+). Jellyin is version 10.8.10 on both. All media files are stored on a separate NAS box, drives are mounted as SMB shares. I connect the Jellyfin server to my TVHeadend RPi using Antennas, and the HDHomeRun feature of Jellyfin. This set-up works fine for recording when the HC4 is used, but fails when the N2+ is used: Jellyfin claims to record the program for the requested length but the file is normally only a few hundred MB in size and a fraction of the length of the program. This also happens if I change the N2+ setup and point it to TVHeadend's m3u URL. I have attached log files for a failed recording. Any suggestions would be much appreciated. jellyfin_log.txt (Size: 9.91 KB / Downloads: 12) |