+- Jellyfin Forum (https://forum.jellyfin.org)
+-- Forum: Support (https://forum.jellyfin.org/f-support)
+--- Forum: Troubleshooting (https://forum.jellyfin.org/f-troubleshooting)
+---- Forum: Networking & Access (https://forum.jellyfin.org/f-networking-access)
+---- Thread: cant connect from local network (/t-cant-connect-from-local-network)
cant connect from local network - somethingwithanother - 2023-07-21
I installed jellyfin server with flatpak on fedora 38. i went into networking and checked that "Bind to local network address" was set to 0.0.0.0, i checked "Allow remote connections to this server", set 192.168.0.0/24 as the "Remote IP address filter". yet i still cant connect to the server via my phone. it works fine if i enter my server's local ip in my browser on said machine, but doesnt work on another device on my local network. forwarding port 8096 to my server in my router settings doesnt fix the issue. i checked settings in flatseal and the app has network access. I also have the following rules in UFW
8096 ALLOW IN 192.168.0.0/24
7359 ALLOW IN 192.168.0.0/24
what am i missing here? idk what else could fix this but all i found only suggest that the "Bind to local network address" was the solution but ive already tried that.
RE: cant connect from local network - TheDreadPirate - 2023-07-21
Did you add a rule on the server's firewall to allow connections to port 8096?
RE: cant connect from local network - somethingwithanother - 2023-07-22
(2023-07-21, 07:49 PM)TheDreadPirate Wrote: Did you add a rule on the server's firewall to allow connections to port 8096?
yea i listed that in the post. i showed me allowing ports 8096 and 7359 i allowed in with ufw
RE: cant connect from local network - TheDreadPirate - 2023-07-22
I just re-read your post. "Remote IP Address Filter" is for WAN connections. 192.168.0.0/24 should be in "LAN networks". Delete whatever you have in "Remote IP Address Filter". What happens now?
RE: cant connect from local network - somethingwithanother - 2023-07-22
(2023-07-22, 01:16 AM)TheDreadPirate Wrote: I just re-read your post. "Remote IP Address Filter" is for WAN connections. 192.168.0.0/24 should be in "LAN networks". Delete whatever you have in "Remote IP Address Filter". What happens now?
still cant access it from other devices on the network