Container is binding to incorrect subnet and ignoring network.xml

Container is binding to incorrect subnet and ignoring network.xml - Printable Version

+- Jellyfin Forum (https://forum.jellyfin.org)
+-- Forum: Support (https://forum.jellyfin.org/f-support)
+--- Forum: Troubleshooting (https://forum.jellyfin.org/f-troubleshooting)
+---- Forum: Networking & Access (https://forum.jellyfin.org/f-networking-access)
+---- Thread: Container is binding to incorrect subnet and ignoring network.xml (/t-container-is-binding-to-incorrect-subnet-and-ignoring-network-xml)

Pages: 1 2 3

Container is binding to incorrect subnet and ignoring network.xml - ghostkjb - 2024-04-03

My docker container is binding to Defined LAN addresses : [10.0.0.0/8,172.16.0.0/12,192.168.0.0/16]
It should be 192.168.1.0/24

I did some research and it said to add the subnet to this file like this:
jellyfin/config/config/network.xml

in the file add it to:
<LocalNetworkSubnets>192.168.1.0/24 <LocalNetworkSubnets />

It still bound to 192.168.0.0/16
So I added to the config line below it:
<LocalNetworkAddresses>192.168.1.201<LocalNetworkAddresses />

it still binds to Defined LAN addresses : [10.0.0.0/8,172.16.0.0/12,192.168.0.0/16]

I'm using --net=host
The 3 adapters are:
Docker: 172.17.0.1
ethernet: 192.168.1.201
loopback: 127.0.0.1
How can I make my container bind to 192.168.1.0/24 instead of Defined LAN addresses : [10.0.0.0/8,172.16.0.0/12,192.168.0.0/16]

Log file attached.

Here is what I'm using to deploy the container:

docker run -d --name jellyfin -e PUID=1000 -e PGID=1000 --net=host -v {config mount location} -v {cache mount location} -v {media mount location} --restart=unless-stopped jellyfin/jellyfin

RE: Container is binding to incorrect subnet and ignoring network.xml - TheDreadPirate - 2024-04-03

This is not for defining which NIC to bind to. It is for defining what address space is considered "internal" for the purposes of bit rate control. And if you did not enable "Allow remote connections", addresses outside of the address spaces defined in this config are considered "external" and are denied access

Also, you can add subnets in the Jellyfin dashboard.

Dashboard > Networking

If you do want to define a specific IP/interface, that config is also in the same section. By default, Jellyfin binds to all available interfaces. If you define 192.168.1.201 as the interface to bind to then it won't bind to the local loopback. Not sure if that mattered.

Also, 192.168.0.0/16 includes 192.168.1.0/24.

RE: Container is binding to incorrect subnet and ignoring network.xml - ghostkjb - 2024-04-03

The problem is that the Jellyfin container is binding to the wrong subnet so on the host that Docker is running on, I can't reach localhost:8096
Allow remote connections is enabled

I have removed this part of the config: <LocalNetworkAddresses>192.168.1.201

RE: Container is binding to incorrect subnet and ignoring network.xml - ghostkjb - 2024-04-03

This is my network.xml for the Jellyfin container:

<NetworkConfiguration xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<RequireHttps>false</RequireHttps>
<CertificatePath/>
<CertificatePassword/>
<BaseUrl/>
<PublicHttpsPort>8920</PublicHttpsPort>
<HttpServerPortNumber>8096</HttpServerPortNumber>
<HttpsPortNumber>8920</HttpsPortNumber>
<EnableHttps>false</EnableHttps>
<PublicPort>8096</PublicPort>
<UPnPCreateHttpPortMap>false</UPnPCreateHttpPortMap>
<UDPPortRange/>
<EnableIPV6>false</EnableIPV6>
<EnableIPV4>true</EnableIPV4>
<EnableSSDPTracing>false</EnableSSDPTracing>
<SSDPTracingFilter/>
<UDPSendCount>2</UDPSendCount>
<UDPSendDelay>100</UDPSendDelay>
<IgnoreVirtualInterfaces>true</IgnoreVirtualInterfaces>
<VirtualInterfaceNames>vEthernet*</VirtualInterfaceNames>
<GatewayMonitorPeriod>60</GatewayMonitorPeriod>
<TrustAllIP6Interfaces>false</TrustAllIP6Interfaces>
<HDHomerunPortRange/>
<PublishedServerUriBySubnet/>
<AutoDiscoveryTracing>false</AutoDiscoveryTracing>
<AutoDiscovery>true</AutoDiscovery>
<RemoteIPFilter/>
<IsRemoteIPFilterBlacklist>false</IsRemoteIPFilterBlacklist>
<EnableUPnP>false</EnableUPnP>
<EnableRemoteAccess>true</EnableRemoteAccess>
<LocalNetworkSubnets>192.168.1.0/24</LocalNetworkSubnets/>
<LocalNetworkAddresses>
<KnownProxies/>
<EnablePublishedServerUriByRequest>false</EnablePublishedServerUriByRequest>
</NetworkConfiguration>

RE: Container is binding to incorrect subnet and ignoring network.xml - TheDreadPirate - 2024-04-03

Code:
[17:25:26] [INF] [1] Main: Kestrel listening on Any IP4 Address

It says it is listening on all interfaces.

The only thing I can think of that would cause this is if this container is being run in a VM with a virtual NIC. By default Jellyfin will ignore virtual NICs with a "vEthernet" in the name.

RE: Container is binding to incorrect subnet and ignoring network.xml - ghostkjb - 2024-04-03

This is the latest log output:

[18:41:08] [INF] [1] Main: Jellyfin version: 10.8.13
[18:41:08] [INF] [1] Main: Environment Variables: ["[JELLYFIN_CACHE_DIR, /cache]", "[DOTNET_SYSTEM_GLOBALIZATION_INVARIANT, 1]", "[JELLYFIN_CONFIG_DIR, /config/config]", "[JELLYFIN_FFMPEG, /usr/lib/jellyfin-ffmpeg/ffmpeg]", "[JELLYFIN_LOG_DIR, /config/log]", "[JELLYFIN_WEB_DIR, /jellyfin/jellyfin-web]", "[JELLYFIN_DATA_DIR, /config]"]
[18:41:08] [INF] [1] Main: Arguments: ["/jellyfin/jellyfin.dll"]
[18:41:08] [INF] [1] Main: Operating system: Linux
[18:41:08] [INF] [1] Main: Architecture: X64
[18:41:08] [INF] [1] Main: 64-Bit Process: True
[18:41:08] [INF] [1] Main: User Interactive: True
[18:41:08] [INF] [1] Main: Processor count: 4
[18:41:08] [INF] [1] Main: Program data path: /config
[18:41:08] [INF] [1] Main: Web resources path: /jellyfin/jellyfin-web
[18:41:08] [INF] [1] Main: Application directory: /jellyfin/
[18:41:08] [INF] [1] Emby.Server.Implementations.AppBase.BaseConfigurationManager: Setting cache path: /cache
[18:41:08] [INF] [1] Emby.Server.Implementations.ApplicationHost: Loading assemblies
[18:41:08] [ERR] [1] Emby.Server.Implementations.AppBase.BaseConfigurationManager: Error loading configuration file: /config/config/network.xml
System.InvalidOperationException: There is an error in XML document (2, 1).
---> System.Xml.XmlException: Data at the root level is invalid. Line 2, position 1.
at System.Xml.XmlTextReaderImpl.Throw(Exception e)
at System.Xml.XmlTextReaderImpl.Throw(String res, String arg)
at System.Xml.XmlTextReaderImpl.ParseRootLevelWhitespace()
at System.Xml.XmlTextReaderImpl.ParseDocumentContent()
at System.Xml.XmlTextReaderImpl.Read()
at System.Xml.XmlReader.MoveToContent()
at Microsoft.Xml.Serialization.GeneratedAssembly.XmlSerializationReaderNetworkConfiguration.Read3_NetworkConfiguration()
--- End of inner exception stack trace ---
at System.Xml.Serialization.XmlSerializer.Deserialize(XmlReader xmlReader, String encodingStyle, XmlDeserializationEvents events)
at System.Xml.Serialization.XmlSerializer.Deserialize(XmlReader xmlReader)
at Emby.Server.Implementations.Serialization.MyXmlSerializer.DeserializeFromStream(Type type, Stream stream)
at Emby.Server.Implementations.Serialization.MyXmlSerializer.DeserializeFromFile(Type type, String file)
at Emby.Server.Implementations.AppBase.BaseConfigurationManager.LoadConfiguration(String path, Type configurationType)
[18:41:08] [INF] [1] Jellyfin.Networking.Manager.NetworkManager: Defined LAN addresses : [10.0.0.0/8,172.16.0.0/12,192.168.0.0/16]
[18:41:08] [INF] [1] Jellyfin.Networking.Manager.NetworkManager: Defined LAN exclusions : []
[18:41:08] [INF] [1] Jellyfin.Networking.Manager.NetworkManager: Using LAN addresses: [10.0.0.0/8,172.16.0.0/12,192.168.0.0/16]
[18:41:08] [INF] [1] Jellyfin.Networking.Manager.NetworkManager: Using bind addresses: []
[18:41:08] [INF] [1] Jellyfin.Networking.Manager.NetworkManager: Using bind exclusions: []
[18:41:37] [INF] [1] Emby.Server.Implementations.Plugins.PluginManager: Loaded plugin: TMDb 10.8.13.0
[18:41:37] [INF] [1] Emby.Server.Implementations.Plugins.PluginManager: Loaded plugin: Studio Images 10.8.13.0
[18:41:37] [INF] [1] Emby.Server.Implementations.Plugins.PluginManager: Loaded plugin: OMDb 10.8.13.0
[18:41:37] [INF] [1] Emby.Server.Implementations.Plugins.PluginManager: Loaded plugin: MusicBrainz 10.8.13.0
[18:41:37] [INF] [1] Emby.Server.Implementations.Plugins.PluginManager: Loaded plugin: AudioDB 10.8.13.0
[18:41:37] [INF] [1] Main: Kestrel listening on Any IP4 Address
[18:41:37] [WRN] [1] Microsoft.AspNetCore.DataProtection.KeyManagement.XmlKeyManager: No XML encryptor configured. Key {32544bad-5cfb-4929-8006-99f598a3f030} may be persisted to storage in unencrypted form.
[18:41:37] [INF] [1] Emby.Server.Implementations.ApplicationHost: Running startup tasks
[18:41:37] [INF] [1] Emby.Server.Implementations.ScheduledTasks.TaskManager: Daily trigger for Extract Chapter Images set to fire at 2024-04-04 02:00:00.000 +00:00, which is 07:18:22.0157853 from now.
[18:41:38] [INF] [1] MediaBrowser.MediaEncoding.Encoder.MediaEncoder: Found ffmpeg version 5.1.4
[18:41:38] [INF] [1] MediaBrowser.MediaEncoding.Encoder.MediaEncoder: Available decoders: ["libdav1d", "av1", "av1_cuvid", "av1_qsv", "h264", "h264_qsv", "h264_cuvid", "hevc", "hevc_qsv", "hevc_cuvid", "mpeg2video", "mpeg2_qsv", "mpeg2_cuvid", "mpeg4", "mpeg4_cuvid", "msmpeg4", "vc1_qsv", "vc1_cuvid", "vp8", "libvpx", "vp8_cuvid", "vp8_qsv", "vp9", "libvpx-vp9", "vp9_cuvid", "vp9_qsv", "aac", "ac3", "dca", "flac", "mp3", "truehd"]
[18:41:38] [INF] [1] MediaBrowser.MediaEncoding.Encoder.MediaEncoder: Available encoders: ["libx264", "h264_amf", "h264_nvenc", "h264_qsv", "h264_v4l2m2m", "h264_vaapi", "libx265", "hevc_amf", "hevc_nvenc", "hevc_qsv", "hevc_vaapi", "mpeg4", "msmpeg4", "libvpx", "libvpx-vp9", "aac", "libfdk_aac", "ac3", "dca", "flac", "libmp3lame", "libopus", "truehd", "libvorbis", "srt"]
[18:41:38] [INF] [1] MediaBrowser.MediaEncoding.Encoder.MediaEncoder: Available filters: ["deinterlace_qsv", "deinterlace_vaapi", "hwupload_cuda", "hwupload_vaapi", "overlay_opencl", "overlay_qsv", "overlay_vaapi", "overlay_cuda", "procamp_vaapi", "scale_cuda", "scale_opencl", "scale_qsv", "scale_vaapi", "tonemap_cuda", "tonemap_opencl", "tonemap_vaapi", "vpp_qsv", "yadif_cuda", "zscale", "alphasrc"]
[18:41:38] [INF] [1] MediaBrowser.MediaEncoding.Encoder.MediaEncoder: Available hwaccel types: ["cuda", "vaapi", "qsv", "drm", "opencl", "vulkan"]
[18:41:39] [INF] [1] MediaBrowser.MediaEncoding.Encoder.MediaEncoder: FFmpeg: /usr/lib/jellyfin-ffmpeg/ffmpeg
[18:41:39] [INF] [1] Emby.Server.Implementations.ApplicationHost: ServerId: 4473513f39104d43806440d7d10c2fce
[18:41:39] [INF] [1] Emby.Server.Implementations.ApplicationHost: Executed all pre-startup entry points in 0:00:00.2193826
[18:41:39] [INF] [1] Emby.Server.Implementations.ApplicationHost: Core startup complete
[18:41:39] [INF] [1] Emby.Server.Implementations.ApplicationHost: Executed all post-startup entry points in 0:00:00.2876196
[18:41:39] [INF] [1] Main: Startup complete 0:00:31.6087095
[18:41:41] [INF] [17] Emby.Server.Implementations.ScheduledTasks.TaskManager: StartupTrigger fired for task: Update Plugins
[18:41:41] [INF] [17] Emby.Server.Implementations.ScheduledTasks.TaskManager: Queuing task PluginUpdateTask
[18:41:41] [INF] [14] Emby.Server.Implementations.ScheduledTasks.TaskManager: Executing Update Plugins
[18:41:41] [INF] [16] Emby.Server.Implementations.IO.LibraryMonitor: Watching directory /media/movies
[18:41:41] [INF] [17] Emby.Server.Implementations.ScheduledTasks.TaskManager: Update Plugins Completed after 0 minute(s) and 0 seconds
[18:41:41] [INF] [17] Emby.Server.Implementations.ScheduledTasks.TaskManager: ExecuteQueuedTasks
[18:41:44] [INF] [15] Emby.Server.Implementations.IO.LibraryMonitor: Watching directory /media/shows
[18:42:08] [WRN] [14] Microsoft.EntityFrameworkCore.Model.Validation: The entity type 'AccessSchedule' is configured to use schema 'jellyfin', but SQLite does not support schemas. This configuration will be ignored by the SQLite provider.
[18:42:08] [WRN] [14] Microsoft.EntityFrameworkCore.Model.Validation: The entity type 'ActivityLog' is configured to use schema 'jellyfin', but SQLite does not support schemas. This configuration will be ignored by the SQLite provider.
[18:42:08] [WRN] [14] Microsoft.EntityFrameworkCore.Model.Validation: The entity type 'CustomItemDisplayPreferences' is configured to use schema 'jellyfin', but SQLite does not support schemas. This configuration will be ignored by the SQLite provider.
[18:42:08] [WRN] [14] Microsoft.EntityFrameworkCore.Model.Validation: The entity type 'DisplayPreferences' is configured to use schema 'jellyfin', but SQLite does not support schemas. This configuration will be ignored by the SQLite provider.
[18:42:08] [WRN] [14] Microsoft.EntityFrameworkCore.Model.Validation: The entity type 'HomeSection' is configured to use schema 'jellyfin', but SQLite does not support schemas. This configuration will be ignored by the SQLite provider.
[18:42:08] [WRN] [14] Microsoft.EntityFrameworkCore.Model.Validation: The entity type 'ImageInfo' is configured to use schema 'jellyfin', but SQLite does not support schemas. This configuration will be ignored by the SQLite provider.
[18:42:08] [WRN] [14] Microsoft.EntityFrameworkCore.Model.Validation: The entity type 'ItemDisplayPreferences' is configured to use schema 'jellyfin', but SQLite does not support schemas. This configuration will be ignored by the SQLite provider.
[18:42:08] [WRN] [14] Microsoft.EntityFrameworkCore.Model.Validation: The entity type 'Permission' is configured to use schema 'jellyfin', but SQLite does not support schemas. This configuration will be ignored by the SQLite provider.
[18:42:08] [WRN] [14] Microsoft.EntityFrameworkCore.Model.Validation: The entity type 'Preference' is configured to use schema 'jellyfin', but SQLite does not support schemas. This configuration will be ignored by the SQLite provider.
[18:42:08] [WRN] [14] Microsoft.EntityFrameworkCore.Model.Validation: The entity type 'ApiKey' is configured to use schema 'jellyfin', but SQLite does not support schemas. This configuration will be ignored by the SQLite provider.
[18:42:08] [WRN] [14] Microsoft.EntityFrameworkCore.Model.Validation: The entity type 'Device' is configured to use schema 'jellyfin', but SQLite does not support schemas. This configuration will be ignored by the SQLite provider.
[18:42:08] [WRN] [14] Microsoft.EntityFrameworkCore.Model.Validation: The entity type 'DeviceOptions' is configured to use schema 'jellyfin', but SQLite does not support schemas. This configuration will be ignored by the SQLite provider.
[18:42:08] [WRN] [14] Microsoft.EntityFrameworkCore.Model.Validation: The entity type 'User' is configured to use schema 'jellyfin', but SQLite does not support schemas. This configuration will be ignored by the SQLite provider.

(2024-04-03, 06:43 PM)TheDreadPirate Wrote:
Code:
[17:25:26] [INF] [1] Main: Kestrel listening on Any IP4 Address

It says it is listening on all interfaces.

The only thing I can think of that would cause this is if this container is being run in a VM with a virtual NIC. By default Jellyfin will ignore virtual NICs with a "vEthernet" in the name.

I'm investigating this now. The OS running docker is a VM.

RE: Container is binding to incorrect subnet and ignoring network.xml - TheDreadPirate - 2024-04-03

(2024-04-03, 06:40 PM)ghostkjb Wrote: <LocalNetworkSubnets>192.168.1.0/24</LocalNetworkSubnets/>
<LocalNetworkAddresses>
<KnownProxies/>
<EnablePublishedServerUriByRequest>false</EnablePublishedServerUriByRequest>
</NetworkConfiguration>

Is this a copy and paste?

Some of the syntax is wrong.

This

<LocalNetworkSubnets>192.168.1.0/24</LocalNetworkSubnets/>
<LocalNetworkAddresses>

Should be

<LocalNetworkSubnets>192.168.1.0/24</LocalNetworkSubnets>
<LocalNetworkAddresses />

RE: Container is binding to incorrect subnet and ignoring network.xml - ghostkjb - 2024-04-03

The nic name on the VM that I want it to use is enp6s18

RE: Container is binding to incorrect subnet and ignoring network.xml - TheDreadPirate - 2024-04-03

(2024-04-03, 06:44 PM)ghostkjb Wrote: [18:41:08] [ERR] [1] Emby.Server.Implementations.AppBase.BaseConfigurationManager: Error loading configuration file: /config/config/network.xml
System.InvalidOperationException: There is an error in XML document (2, 1).
---> System.Xml.XmlException: Data at the root level is invalid. Line 2, position 1.
at System.Xml.XmlTextReaderImpl.Throw(Exception e)
at System.Xml.XmlTextReaderImpl.Throw(String res, String arg)
at System.Xml.XmlTextReaderImpl.ParseRootLevelWhitespace()
at System.Xml.XmlTextReaderImpl.ParseDocumentContent()
at System.Xml.XmlTextReaderImpl.Read()
at System.Xml.XmlReader.MoveToContent()
at Microsoft.Xml.Serialization.GeneratedAssembly.XmlSerializationReaderNetworkConfiguration.Read3_NetworkConfiguration()
--- End of inner exception stack trace ---
at System.Xml.Serialization.XmlSerializer.Deserialize(XmlReader xmlReader, String encodingStyle, XmlDeserializationEvents events)
at System.Xml.Serialization.XmlSerializer.Deserialize(XmlReader xmlReader)
at Emby.Server.Implementations.Serialization.MyXmlSerializer.DeserializeFromStream(Type type, Stream stream)
at Emby.Server.Implementations.Serialization.MyXmlSerializer.DeserializeFromFile(Type type, String file)
at Emby.Server.Implementations.AppBase.BaseConfigurationManager.LoadConfiguration(String path, Type configurationType)

This confirms my last post. Fix the XML as suggested in my last post.

RE: Container is binding to incorrect subnet and ignoring network.xml - ghostkjb - 2024-04-03

(2024-04-03, 06:46 PM)TheDreadPirate Wrote:
(2024-04-03, 06:40 PM)ghostkjb Wrote: <LocalNetworkSubnets>192.168.1.0/24</LocalNetworkSubnets/>
<LocalNetworkAddresses>
<KnownProxies/>
<EnablePublishedServerUriByRequest>false</EnablePublishedServerUriByRequest>
</NetworkConfiguration>

Is this a copy and paste?

Some of the syntax is wrong.

This

<LocalNetworkSubnets>192.168.1.0/24</LocalNetworkSubnets/>
<LocalNetworkAddresses>

Should be

<LocalNetworkSubnets>192.168.1.0/24</LocalNetworkSubnets>
<LocalNetworkAddresses />

I typed it out, it's currently:
<LocalNetworkSubnets>192.168.1.0/24</LocalNetworkSubnets>
<LocalNetworkAddresses />

(2024-04-03, 06:48 PM)TheDreadPirate Wrote:
(2024-04-03, 06:44 PM)ghostkjb Wrote: [18:41:08] [ERR] [1] Emby.Server.Implementations.AppBase.BaseConfigurationManager: Error loading configuration file: /config/config/network.xml
System.InvalidOperationException: There is an error in XML document (2, 1).
---> System.Xml.XmlException: Data at the root level is invalid. Line 2, position 1.
at System.Xml.XmlTextReaderImpl.Throw(Exception e)
at System.Xml.XmlTextReaderImpl.Throw(String res, String arg)
at System.Xml.XmlTextReaderImpl.ParseRootLevelWhitespace()
at System.Xml.XmlTextReaderImpl.ParseDocumentContent()
at System.Xml.XmlTextReaderImpl.Read()
at System.Xml.XmlReader.MoveToContent()
at Microsoft.Xml.Serialization.GeneratedAssembly.XmlSerializationReaderNetworkConfiguration.Read3_NetworkConfiguration()
--- End of inner exception stack trace ---
at System.Xml.Serialization.XmlSerializer.Deserialize(XmlReader xmlReader, String encodingStyle, XmlDeserializationEvents events)
at System.Xml.Serialization.XmlSerializer.Deserialize(XmlReader xmlReader)
at Emby.Server.Implementations.Serialization.MyXmlSerializer.DeserializeFromStream(Type type, Stream stream)
at Emby.Server.Implementations.Serialization.MyXmlSerializer.DeserializeFromFile(Type type, String file)
at Emby.Server.Implementations.AppBase.BaseConfigurationManager.LoadConfiguration(String path, Type configurationType)

This confirms my last post. Fix the XML as suggested in my last post.

I don't see my error now so I'm going to grab the current full network.xml:

<?xml version="1.0" encoding="utf-8"?>
NetworkConfiguration xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<RequireHttps>false</RequireHttps>
<CertificatePath />
<CertificatePassword />
<BaseUrl />
<PublicHttpsPort>8920</PublicHttpsPort>
<HttpServerPortNumber>8096</HttpServerPortNumber>
<HttpsPortNumber>8920</HttpsPortNumber>
<EnableHttps>false</EnableHttps>
<PublicPort>8096</PublicPort>
<UPnPCreateHttpPortMap>false</UPnPCreateHttpPortMap>
<UDPPortRange />
<EnableIPV6>false</EnableIPV6>
<EnableIPV4>true</EnableIPV4>
<EnableSSDPTracing>false</EnableSSDPTracing>
<SSDPTracingFilter />
<UDPSendCount>2</UDPSendCount>
<UDPSendDelay>100</UDPSendDelay>
<IgnoreVirtualInterfaces>true</IgnoreVirtualInterfaces>
<VirtualInterfaceNames>vEthernet*</VirtualInterfaceNames>
<GatewayMonitorPeriod>60</GatewayMonitorPeriod>
<TrustAllIP6Interfaces>false</TrustAllIP6Interfaces>
<HDHomerunPortRange />
<PublishedServerUriBySubnet />
<AutoDiscoveryTracing>false</AutoDiscoveryTracing>
<AutoDiscovery>true</AutoDiscovery>
<RemoteIPFilter />
<IsRemoteIPFilterBlacklist>false</IsRemoteIPFilterBlacklist>
<EnableUPnP>false</EnableUPnP>
<EnableRemoteAccess>true</EnableRemoteAccess>
<LocalNetworkSubnets>192.168.1.0/24</LocalNetworkSubnets>
<LocalNetworkAddresses />
<KnownProxies />
<EnablePublishedServerUriByRequest>false</EnablePublishedServerUriByRequest>
</NetworkConfiguration>