+- Jellyfin Forum (https://forum.jellyfin.org)
+-- Forum: Support (https://forum.jellyfin.org/f-support)
+--- Forum: Troubleshooting (https://forum.jellyfin.org/f-troubleshooting)
+--- Thread: HA isn't working (/t-ha-isn-t-working)
HA isn't working - alveou - 2023-08-01
Hello !
I've just installed Jellyfin trought Portainer and when I activate the Hardware Acceleration, I have this error:
"This client isn't compatible with the media and the server isn't sending a compatible media format."
It's working when I disable it but it's super laggy.
I'm using an 8GB Raspberrypi. Before installing it with Portainer, Jellyfin was directly on the Pi and everything was working fine.
Not sure what to do here..
Thank you for your help !
RE: HA isn't working - TheDreadPirate - 2023-08-01
I don't know the specifics of how to do this with Portainer, but you would need to pass your GPU into the container. If you have not done so already.
Something along these lines.
https://jellyfin.org/docs/general/administration/hardware-acceleration/intel#configure-with-linux-virtualization
RE: HA isn't working - alveou - 2023-08-01
Ooohh I see, I'm very new to this Jellyfin - Portainer - Linux. I'll this !
Thank you !
RE: HA isn't working - alveou - 2023-08-01
(2023-08-01, 06:06 PM)TheDreadPirate Wrote: I don't know the specifics of how to do this with Portainer, but you would need to pass your GPU into the container. If you have not done so already.
Something along these lines.
https://jellyfin.org/docs/general/administration/hardware-acceleration/intel#configure-with-linux-virtualization
So I think I need to "activate" the GPU on Portainer but I don't know how to find the UUID and name for the GPU on the RaspberryPi
RE: HA isn't working - TheDreadPirate - 2023-08-01
Not sure how to help you from here. All the Portainer documentation I can find is usually referencing Nvidia or Intel GPUs.
Is there a reason you moved jellyfin from baremetal to Portainer?