Solved: E-AC3 passthrough hangs linux client

Solved: E-AC3 passthrough hangs linux client - Printable Version

+- Jellyfin Forum (https://forum.jellyfin.org)
+-- Forum: Support (https://forum.jellyfin.org/f-support)
+--- Forum: Troubleshooting (https://forum.jellyfin.org/f-troubleshooting)
+--- Thread: Solved: E-AC3 passthrough hangs linux client (/t-solved-e-ac3-passthrough-hangs-linux-client)

Solved: E-AC3 passthrough hangs linux client - klaarnou - 2024-07-26

Hello.

I have enabled HDMI and passthrough as per below.
If I enable E-AC3 the client hangs when I play a movie that uses that codec.

I am using Linux Ubuntu with latest client.

[Image: jelly.png]

thanks.

Bernard.

RE: E-AC3 passthrough hangs linux client - TheDreadPirate - 2024-07-26

@theguymadmax - do you have any insight? I don't have HDMI pass-through on any of my JMP clients so I have no idea if this is normal or not.

RE: E-AC3 passthrough hangs linux client - theguymadmax - 2024-07-26

I had the same issue. With around 20 device options to choose from, I found that leaving it on "Autoselect device" would cause JMP to hang when trying to play files with non-PCM audio. I had to test each device individually until I found one that didn’t cause JMP to freeze.

RE: E-AC3 passthrough hangs linux client - klaarnou - 2024-07-26

(2024-07-26, 05:44 PM)theguymadmax Wrote: I had the same issue. With around 20 device options to choose from, I found that leaving it on "Autoselect device" would cause JMP to hang when trying to play files with non-PCM audio. I had to test each device individually until I found one that didn’t cause JMP to freeze.

Thank you very much for your help.

I have a long list of options, tried them all but if I enable E-AC3 passthrough and play a movie that uses that codec the client hangs.

regards,

Bernard.

RE: E-AC3 passthrough hangs linux client - klaarnou - 2024-07-29

(2024-07-26, 04:07 PM)TheDreadPirate Wrote: @theguymadmax - do you have any insight? I don't have HDMI pass-through on any of my JMP clients so I have no idea if this is normal or not.

Is it ok if I log a bug for this on Github?

regards,

Bernard.

RE: E-AC3 passthrough hangs linux client - TheDreadPirate - 2024-07-29

Sure. Might as well.

https://github.com/jellyfin/jellyfin-media-player/issues

RE: E-AC3 passthrough hangs linux client - theguymadmax - 2024-07-29

Additional notes: The settings I use don't work with the Flatpak version of JMP; they only function with JMP installed directly from the deb packages. I also encountered issues with PipeWire on earlier versions of Ubuntu, but it has been relatively trouble-free with 24.04.

RE: E-AC3 passthrough hangs linux client - klaarnou - 2024-07-29

(2024-07-29, 03:06 PM)theguymadmax Wrote: Additional notes: The settings I use don't work with the Flatpak version of JMP; they only function with JMP installed directly from the deb packages. I also encountered issues with PipeWire on earlier versions of Ubuntu, but it has been relatively trouble-free with 24.04.

Thank you for your help.

I am running the latest version form .deb already.
Gonna log a bug and see what they say.

cheers,

Bernard.

RE: Solved: E-AC3 passthrough hangs linux client - klaarnou - 2024-07-30

It seems that after a reboot everything work fine.

Go figure.

Thanks you for your help.

regards,

Bernard.