Yesterday, 07:29 PM
Hi,
I am having similar issues with my setup:
Host OS: Proxmox 9.0.11
Container: Docker Container inside Proxmox VM (Debian 13, latest) running Jellyfin (4 vCPU / 12GB RAM)
Hardware: N150 Mini-PC, 16 GB RAM, SSD
Storage: RAID-1 NAS 1Gbit
Logs and intel_gpu_top proof iGPU passthrough is working fine.
Symptoms are pretty much the same as OP: Startup Jellyfin, play any kind of media and the Transcoding works perfectly fine, for a very short time. I have up to 10x transcoding ratio, but shortly after it drops to <1x and it ultimately results in stuttering playback.
I have tested both, QSV and VAAPI, but my own benchmarks show QSV a little more performant.
I observe high RAM usage, that also not really drops lower, at least according to the Proxmox Monitoring UI.
I am having similar issues with my setup:
Host OS: Proxmox 9.0.11
Container: Docker Container inside Proxmox VM (Debian 13, latest) running Jellyfin (4 vCPU / 12GB RAM)
Hardware: N150 Mini-PC, 16 GB RAM, SSD
Storage: RAID-1 NAS 1Gbit
Logs and intel_gpu_top proof iGPU passthrough is working fine.
Symptoms are pretty much the same as OP: Startup Jellyfin, play any kind of media and the Transcoding works perfectly fine, for a very short time. I have up to 10x transcoding ratio, but shortly after it drops to <1x and it ultimately results in stuttering playback.
I have tested both, QSV and VAAPI, but my own benchmarks show QSV a little more performant.
I observe high RAM usage, that also not really drops lower, at least according to the Proxmox Monitoring UI.