|
2024-11-29, 04:21 PM
Hello, I have installed Jellyfine under CasaOS. This has worked without any problems. When I started Jellyfin for the first time, the initial setup did not start.... so I could not set up a user and password.
What is the problem? On another Raspberry it worked with CasaOS and Jellyfin without any problems.
2024-11-29, 05:40 PM
Did you transfer any data from an old Jellyfin install to this new CasaOS host?
You can also try clearing your browser cache.
Jellyfin 10.10.3 (Docker)
Ubuntu 24.04 LTS Intel i3 12100 Intel Arc A380 OS drive - SK Hynix P41 1TB Storage 3x WD Red Pro 6TB CMR in RAIDZ1 (JF Library) ![[Image: GitHub%20Sponsors-grey?logo=github]](https://img.shields.io/badge/GitHub%20Sponsors-grey?logo=github){kind=icon}
2024-11-29, 05:46 PM
Hello..... No, I have completely reinstalled CasaOS and Jellyfin. The SD card was also new....Raspi 5 is the same one that works with the other SD card without any problems
2024-11-29, 08:29 PM
Are you using bridge networking or host networking? You're using the IP of the CasaOS host, right?
http://192.168.X.X:8096
Jellyfin 10.10.3 (Docker)
Ubuntu 24.04 LTS Intel i3 12100 Intel Arc A380 OS drive - SK Hynix P41 1TB Storage 3x WD Red Pro 6TB CMR in RAIDZ1 (JF Library)
2024-11-30, 12:19 PM
Yes .... Raspi 5 and CasaOs IP
2024-11-30, 05:05 PM
(This post was last modified: 2024-11-30, 05:05 PM by TheDreadPirate.)
Is port 8096 open on the host firewall?
Jellyfin 10.10.3 (Docker)
Ubuntu 24.04 LTS Intel i3 12100 Intel Arc A380 OS drive - SK Hynix P41 1TB Storage 3x WD Red Pro 6TB CMR in RAIDZ1 (JF Library)
|
|
|
|
|
