+- Jellyfin Forum (https://forum.jellyfin.org)
+-- Forum: Support (https://forum.jellyfin.org/f-support)
+--- Forum: Troubleshooting (https://forum.jellyfin.org/f-troubleshooting)
+--- Thread: SOLVED: The decoding path cannot be saved after setting - 解码路径设置后无法保存 (/t-solved-the-decoding-path-cannot-be-saved-after-setting-%E8%A7%A3%E7%A0%81%E8%B7%AF%E5%BE%84%E8%AE%BE%E7%BD%AE%E5%90%8E%E6%97%A0%E6%B3%95%E4%BF%9D%E5%AD%98)
Pages:
1
2
RE: 解码路径设置后无法保存 - TheDreadPirate - 2025-04-15
Also, which QNAP package did you install for Jellyfin? This github page has QNAP packages that are using MUCH newer versions of Jellyfin than what you currently have deployed. And it definitely includes jellyfin-ffmpeg.
https://github.com/pdulvp/jellyfin-qnap
RE: 解码路径设置后无法保存 - 我是菁英 - 2025-04-16
(2025-04-15, 01:21 PM)TheDreadPirate Wrote: Does the QNAP package not come with jellyfin-ffmpeg?!确实没有/usr/lib/jellyfin-ffmpeg/ffmpeg，甚至文件夹里面没有usr这个文件夹。
Code:
[BB@NAS CACHEDEV1_DATA]$ cd .qpkg
[BB@NAS .qpkg]$ cd Jellyfin/
[BB@NAS Jellyfin]$ ls
bin/ CACHE/ CONF/ DB/ jellyfin/ Jellyfin@ Jellyfin.sh* lib/ LOG/Code:
[BB@NAS .qpkg]$ cd Jellyfin/
[BB@NAS Jellyfin]$ ls
bin/ CACHE/ CONF/ DB/ jellyfin/ Jellyfin@ Jellyfin.sh* lib/ LOG/
[BB@NAS Jellyfin]$ cd bin
[BB@NAS bin]$ ls
ffmpeg* ffmpeg-10bit* ffprobe* GPLv3.txt* manpages/ model/ qt-faststart* readme.txt*Quote:There is indeed no /usr/lib/jellyfin-ffmpeg/ffmpeg, and there is not even a folder called usr in the folder.
Looking through the folders, only the following directories have ffmpeg.Code:[BB@NAS CACHEDEV1_DATA]$ cd .qpkg
[BB@NAS .qpkg]$ cd Jellyfin/
[BB@NAS Jellyfin]$ ls
bin/ CACHE/ CONF/ DB/ jellyfin/ Jellyfin@ Jellyfin.sh* lib/ LOG/
Code:[BB@NAS .qpkg]$ cd Jellyfin/
[BB@NAS Jellyfin]$ ls
bin/ CACHE/ CONF/ DB/ jellyfin/ Jellyfin@ Jellyfin.sh* lib/ LOG/
[BB@NAS Jellyfin]$ cd bin
[BB@NAS bin]$ ls
ffmpeg* ffmpeg-10bit* ffprobe* GPLv3.txt* manpages/ model/ qt-faststart* readme.txt*
RE: 解码路径设置后无法保存 - 我是菁英 - 2025-04-16
(2025-04-15, 01:28 PM)TheDreadPirate Wrote: Also, which QNAP package did you install for Jellyfin? This github page has QNAP packages that are using MUCH newer versions of Jellyfin than what you currently have deployed. And it definitely includes jellyfin-ffmpeg.
https://github.com/pdulvp/jellyfin-qnap
我前面搜索相关问题时候，已经注意到了这个jellyfin安装包了，因为其没有签名，我觉得有风险，所以就没有进行安装。
我安装的版本是10.9.2：jellyfin-10.9.2下载地址
Quote:When I searched for related issues earlier, I noticed the jellyfin installation package. Because it was not signed, I thought it was risky, so I didn't install it.
The version I installed is 10.9.2: jellyfin-10.9.2 download address
RE: 解码路径设置后无法保存 - 4r5hw45twh - 2025-04-16
(2025-04-12, 12:26 PM)我是菁英 Wrote: 已开启硬件解码选项
说英语。
RE: 解码路径设置后无法保存 - 我是菁英 - 2025-04-16
(2025-04-16, 11:13 AM)4r5hw45twh Wrote:(2025-04-12, 12:26 PM)我是菁英 Wrote: 已开启硬件解码选项
说英语。
中文是我的母语，我讲中文，况且现在翻译软件这么发达，我首先看回复的英文原文，不理解才翻译过来理解。
RE: 解码路径设置后无法保存 - TheDreadPirate - 2025-04-16
The github link I provided for a more modern Jellyfin QNAP package is popular and commonly used. It is safe to use that version. AFAICT, the version you have does not come with ffmpeg and I am not familiar enough with how QNAP works to provide a way to somehow link an external ffmpeg into Jellyfin.
I recommend you, at least, give the QNAP package from that github link a try.
RE: 解码路径设置后无法保存 - TheDreadPirate - 2025-04-16
(2025-04-16, 11:13 AM)4r5hw45twh Wrote:(2025-04-12, 12:26 PM)我是菁英 Wrote: 已开启硬件解码选项
说英语。
English is not a requirement for this forum. It is encouraged, but if your English is not good enough we actually prefer you use your native language. As the OP stated, translators are pretty good these days and it is easier to translate the post then force the OP to speak broken English and make it harder for us to decipher what they are trying to communicate.
https://forum.jellyfin.org/t-jellyfin-forum-rules
Quote:6. Please write in English if at all possible, as English is the working language of the Jellyfin project. If you cannot, please write in your native language (with or without attempted English) and ask for a translation if required. Replies to such threads shall be in English, or in English + Original language, for the benefit of the wider community. Thread subjects must be in English.
However, I will go back and post translations for each. And change the title.
RE: 解码路径设置后无法保存 - 我是菁英 - 2025-04-16
(2025-04-16, 02:31 PM)TheDreadPirate Wrote:(2025-04-16, 11:13 AM)4r5hw45twh Wrote:(2025-04-12, 12:26 PM)我是菁英 Wrote: 已开启硬件解码选项
说英语。
English is not a requirement for this forum. It is encouraged, but if your English is not good enough we actually prefer you use your native language. As the OP stated, translators are pretty good these days and it is easier to translate the post then force the OP to speak broken English and make it harder for us to decipher what they are trying to communicate.
https://forum.jellyfin.org/t-jellyfin-forum-rules
Quote:6. Please write in English if at all possible, as English is the working language of the Jellyfin project. If you cannot, please write in your native language (with or without attempted English) and ask for a translation if required. Replies to such threads shall be in English, or in English + Original language, for the benefit of the wider community. Thread subjects must be in English.
However, I will go back and post translations for each. And change the title.
语言是一种沟通方式罢了，能沟通得畅通的人总是能在一起聊，有句俗语叫话不投机半句多。另外，再次感谢您不遗余力为我解答问题。
RE: 解码路径设置后无法保存 - 我是菁英 - 2025-04-16
(2025-04-16, 02:25 PM)TheDreadPirate Wrote: The github link I provided for a more modern Jellyfin QNAP package is popular and commonly used. It is safe to use that version. AFAICT, the version you have does not come with ffmpeg and I am not familiar enough with how QNAP works to provide a way to somehow link an external ffmpeg into Jellyfin.
I recommend you, at least, give the QNAP package from that github link a try.
感谢您的解答和回复，我再尝试其他方法吧。