+- Jellyfin Forum (https://forum.jellyfin.org)
+-- Forum: Support (https://forum.jellyfin.org/f-support)
+--- Forum: Troubleshooting (https://forum.jellyfin.org/f-troubleshooting)
+--- Thread: Unable to connect to server with Local Clients (/t-unable-to-connect-to-server-with-local-clients)
RE: Unable to connect to server with Local Clients - RandomGuyBert124 - 2024-10-05
I believe that is the general vpn I use to connect to the internet. When I checked with ifconfig in my terminal it said it was utun420 and I believe that is setup by the VPN I use. I have tried disconnecting from it to connect to the server to see if that was causing the issue but I am still unable to connect when I do that.
RE: Unable to connect to server with Local Clients - TheDreadPirate - 2024-10-05
Try configuring Jellyfin to bind to your LAN address.
RE: Unable to connect to server with Local Clients - RandomGuyBert124 - 2024-10-06
I just configured it to bind to my LAN address and restarted the server. I am still unable to connect with other devices on my network.
I just read the most recent errors in my log file and it's showing this:
[2024-10-05 22:47:48.265 -04:00] [ERR] Error sending socket message from "192.168.1.125" to "239.255.255.250:1900"
System.Net.Sockets.SocketException (13): Permission denied
at System.Net.Sockets.Socket.AwaitableSocketAsyncEventArgs.SendToAsync(Socket socket, CancellationToken cancellationToken)
at Rssdp.Infrastructure.SsdpCommunicationsServer.SendFromSocket(Socket socket, Byte[] messageData, IPEndPoint destination, CancellationToken cancellationToken)
at System.Runtime.CompilerServices.AsyncMethodBuilderCore.Start[TStateMachine](TStateMachine& stateMachine)
at Rssdp.Infrastructure.SsdpCommunicationsServer.SendFromSocket(Socket socket, Byte[] messageData, IPEndPoint destination, CancellationToken cancellationToken)
at System.Threading.Tasks.Task.WhenAll(IEnumerable
1 tasks)
at Rssdp.Infrastructure.SsdpCommunicationsServer.SendMulticastMessage(String message, Int32 sendCount, IPAddress fromlocalIPAddress, CancellationToken cancellationToken)
at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Runtime.CompilerServices.AsyncTaskMethodBuilder1.AsyncStateMachineBox`1.MoveNext(Thread threadPoolThread)at System.Threading.Tasks.AwaitTaskContinuation.RunOrScheduleAction(IAsyncStateMachineBox box, Boolean allowInlining)
at System.Threading.Tasks.Task.RunContinuations(Object continuationObject)
at System.Threading.Tasks.Task.DelayPromise.CompleteTimedOut()
at System.Threading.TimerQueueTimer.Fire(Boolean isThreadPool)
at System.Threading.TimerQueue.FireNextTimers()
at System.Threading.ThreadPoolWorkQueue.Dispatch()
at System.Threading.PortableThreadPool.WorkerThread.WorkerThreadStart()
I looked into it and it says it has to do with the DLNA plugin. Could that being configured wrong be what's causing me to be unable to connect?
RE: Unable to connect to server with Local Clients - TheDreadPirate - 2024-10-06
DLNA only matters if you are using DLNA clients. From your opening post, it sounds like you are NOT.
You'd have to open port 1900 UDP in UFW for DLNA to work. And UDP port 7359 for service discovery.
But neither of those are necessary if you are manually entering the address and port into actual jellyfin clients.
Can you tell me what power line ethernet adapter you are using? I want find the documentation to rule out any weirdness with that.
RE: Unable to connect to server with Local Clients - RandomGuyBert124 - 2024-10-06
I am using the Netgear Powerline Adapter 2000 w/ Wall Plug:
https://www.netgear.com/home/wired/powerline/plp2000/
RE: Unable to connect to server with Local Clients - RandomGuyBert124 - 2024-10-06
I do have the DLNA plug in installed, could that be causing an issue? Should I uninstall it?
RE: Unable to connect to server with Local Clients - TheDreadPirate - 2024-10-06
If you don't use DLNA, uninstall it. It isn't necessary for actual Jellyfin clients.
You're able to connect to the Internet from your Jellyfin server, correct? What is the output of this command?
Code:
netplan status
nslookup google.com
ping -c 1 google.comSensor any public IPv6 addresses, if there are any. "fe80" IPv6 addresses are local only and not sensitive.
RE: Unable to connect to server with Local Clients - RandomGuyBert124 - 2024-10-06
Yes I am able to connect to the internet from my jellyfin server. Which are the public ipv6 addresses? Are they any addresses that have anything other than fe80 between 26xx and the next number?
RE: Unable to connect to server with Local Clients - TheDreadPirate - 2024-10-06
fe80 is local link, equivalent to 192.168 for IPv4. Anything else is a public address. 2600 and 2601 are common for the first octet for US ISPs. You only need to censor the octets after 2600 or 2601 since the first octet is not enough to narrow down your address.
RE: Unable to connect to server with Local Clients - RandomGuyBert124 - 2024-10-07
Online state: offline
DNS Addresses: 127.0.0.53 (stub)
DNS Search: .
● 1: lo ethernet UNKNOWN/UP (unmanaged)
Addresses: 127.0.0.1/8
::1/128
::1 metric 256
● 2: enp0s25 ethernet UP (unmanaged)
Addresses: 192.168.1.126/24
Routes: default via 192.168.1.254 metric 20100 (dhcp)
154.47.28.131 via 192.168.1.254 (boot)
169.254.0.0/16 metric 1000 (boot, link)
192.168.1.0/24 from 192.168.1.126 metric 100 (link)
● 8: utun420 tunnel/wireguard UNKNOWN/UP (unmanaged)
Addresses: 100.112.133.126/32
DNS Addresses: 10.255.255.3
DNS Search: .
10.255.255.0/24 (boot, link)
10.255.255.3 (boot, link)
Name: google.com
Address: 172.217.215.138
Name: google.com
Address: 172.217.215.101
Name: google.com
Address: 172.217.215.100
Name: google.com
Address: 172.217.215.102
Name: google.com
Address: 172.217.215.113
Name: google.com
Address: 172.217.215.139
PING google.com (172.217.215.100) 56(84) bytes of data.
64 bytes from yo-in-f100.1e100.net (172.217.215.100): icmp_seq=1 ttl=59 time=10.5 ms
--- google.com ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 10.466/10.466/10.466/0.000 ms