Remote access

[TheDreadPirate]

A thought occurred. Since you mentioned that your IP did NOT change, I remembered that some ISPs block port 80 and 443 on residental Internet plans. Their justification being that "only businesses need to run a web server".

Try using a non-standard port for the "external" port.

Something like this for the port forwarding rule
external port = 50080 -> internal port = 80
external port = 50443 -> internal port = 443

When you're remote you'd have to add the port to the end of the address. https://jellyfin.domain.tld:50443. NAT Loopback should handle this gracefully as well.

Your ISP blocking port 80 and 443 makes more sense than CGNAT. From other users here that did have CGNAT, they just straight up did not have the ability to setup port forwarding on their ISP provided router.

Regarding setting a cutom DNS entry, IP Alias doesn't look like what we need. And the manual I could find for a router in the same family wasn't much help. If it was accurate, you cannot set a custom DNS entry.

[carlospj]

A thought occurred.  Since you mentioned that your IP did NOT change, I remembered that some ISPs block port 80 and 443 on residental Internet plans.  Their justification being that "only businesses need to run a web server".

Try using a non-standard port for the "external" port.

Something like this for the port forwarding rule
external port = 50080 -> internal port = 80
external port = 50443 -> internal port = 443

When you're remote you'd have to add the port to the end of the address.  https://jellyfin.domain.tld:50443.  NAT Loopback should handle this gracefully as well.

Hello again,

OMG, this is working! I finally have remote access to Jellyfin!! It was the blocking thing for sure!

Although I have a couple of questions.

Is it right the ports 5080 and 5433? Because the ports you put gave me an End Port Range error.

An second question. I still don't have access to jellyfin with the URL in my Local Network. Is there a solution for that or I should use the LOCAL_IP:PORT to access it? Do I have to change something in cloulflare, npm or the docker compose? Maybe the JELLYFIN_PublishedServerUrl variable?

Thank you for all your help!