2024-09-09, 10:30 PM
(This post was last modified: 2024-09-09, 10:32 PM by sandmanninja. Edited 1 time in total.)
Version: 10.9.10 (upgraded from 10.9)
Platform: ASUSTOR AS1102TL-13AB
NAS IP Address: 192.168.1.31
URL (from my Windows 11 PC): http://192.168.1.31:8000/portal/
Problem Summary: After upgrading my Jellyfin running on my NAS, my TV can no longer find Jellyfin
Hello
Last night I upgraded from Jellyfin 10.9 to 10.9.10 - my TV cannot find Jellyfin now.
I can go to my ASUSTOR Control Center and open a webpage on my computer, and it opens & plays all media normally.
But the Google Smart TV (connected via a CAT-6 network cable, which is plugged into a dumb switch - the same switch that the NAS is plugged into) cannot find Jellyfin as an input source.
Mind you, it has worked every day since I got the NAS about a year ago.
Literally the only thing that has changed is that I updated Jellyfin.
From what I've read on different social media platforms, lots of people are having issues since upgrading to version 10.9.10
I've made a rule in my Windows Defender Firewall, opening TCP & UDP port 8096 (both incoming and outgoing)- even though I never needed this prior to upgrading. I only did it because I read somewhere that someone did that and it fixed their similar issue.
I would be perfectly happy to rollback back to version 10.9, but if that is not an option then can someone please advise me how I can fix this.
I have attached some screenshots and have pasted the log file from yesterday, hoping to provide information to have someone help me.
Thank you
Platform: ASUSTOR AS1102TL-13AB
NAS IP Address: 192.168.1.31
URL (from my Windows 11 PC): http://192.168.1.31:8000/portal/
Problem Summary: After upgrading my Jellyfin running on my NAS, my TV can no longer find Jellyfin
Hello
Last night I upgraded from Jellyfin 10.9 to 10.9.10 - my TV cannot find Jellyfin now.
I can go to my ASUSTOR Control Center and open a webpage on my computer, and it opens & plays all media normally.
But the Google Smart TV (connected via a CAT-6 network cable, which is plugged into a dumb switch - the same switch that the NAS is plugged into) cannot find Jellyfin as an input source.
Mind you, it has worked every day since I got the NAS about a year ago.
Literally the only thing that has changed is that I updated Jellyfin.
From what I've read on different social media platforms, lots of people are having issues since upgrading to version 10.9.10
I've made a rule in my Windows Defender Firewall, opening TCP & UDP port 8096 (both incoming and outgoing)- even though I never needed this prior to upgrading. I only did it because I read somewhere that someone did that and it fixed their similar issue.
I would be perfectly happy to rollback back to version 10.9, but if that is not an option then can someone please advise me how I can fix this.
I have attached some screenshots and have pasted the log file from yesterday, hoping to provide information to have someone help me.
Thank you