2024-11-07, 10:43 AM
Hello there!
I successfuly installed Jellyfin on my Radxa Rock 5 ITX (RK3558
and I use a small FriendlyElec Nano node to serve as a TVHeadend server with a DVB-S stick plugged in; it only has Ethernet, USB and Power, so it's perfect.
However, when i try to open a TV stream in Jellyfin, it is reported that ffmpeg exited with code 253. So, I grabbed the exact command from the logs and ran it myself to see what the output looked like.
On my instance, I do have some hardware accelerations enabled, so I bet this has something to do with it. But, my ffmpeg-fu is quite terrible.
Here is the log:
Do you spot anything obvious here? In my configuration, I enabled these transcoding formats enabled: H264, HEVC, AV1, HEVC 10bit.
Thank you and kind regards,
Ingwie
I successfuly installed Jellyfin on my Radxa Rock 5 ITX (RK3558
and I use a small FriendlyElec Nano node to serve as a TVHeadend server with a DVB-S stick plugged in; it only has Ethernet, USB and Power, so it's perfect.However, when i try to open a TV stream in Jellyfin, it is reported that ffmpeg exited with code 253. So, I grabbed the exact command from the logs and ran it myself to see what the output looked like.
On my instance, I do have some hardware accelerations enabled, so I bet this has something to do with it. But, my ffmpeg-fu is quite terrible.
Here is the log:
Code:
root@0ce6505ce3a2:/# /usr/lib/jellyfin-ffmpeg/ffmpeg -analyzeduration 3000000 -probesize 1G -i "http://192.168.1.8:9981/stream/channelid/694893686?ticket=8bf29d848c58cfe3f83b3cdc79e688c67abe6f79" -map_metadata -1 -map_chapters -1 -threads 0 -sn -codec:v:0 libsvtav1 -preset 10 -b:v 143626438 -bufsize 287252876 -profile:v:0 main -level 53 -svtav1-params:0 rc=1:tune=0:film-grain=0:enable-overlays=1:enable-tf=0 -vf "setparams=color_primaries=bt709:color_trc=bt709:colorspace=bt709,yadif=0:-1:0,format=yuv420p" -codec:a:0 libfdk_aac -ab 384000 -copyts -avoid_negative_ts disabled -max_muxing_queue_size 2048 -f hls -max_delay 5000000 -hls_time 3 -hls_segment_type fmp4 -hls_fmp4_init_filename "7240ebd99b28f2ec8c2145ae92f8034c-1.mp4" -start_number 0 -hls_base_url "hls/7240ebd99b28f2ec8c2145ae92f8034c/" -hls_segment_filename "/cache/transcodes/7240ebd99b28f2ec8c2145ae92f8034c%d.mp4" -hls_playlist_type event -hls_list_size 0 -y "/cache/transcodes/7240ebd99b28f2ec8c2145ae92f8034c.m3u8"
ffmpeg version 7.0.2-Jellyfin Copyright (c) 2000-2024 the FFmpeg developers
built with gcc 12 (Debian 12.2.0-14)
configuration: --prefix=/usr/lib/jellyfin-ffmpeg --target-os=linux --extra-version=Jellyfin --disable-doc --disable-ffplay --disable-ptx-compression --disable-static --disable-libxcb --disable-sdl2 --disable-xlib --enable-lto=auto --enable-gpl --enable-version3 --enable-shared --enable-gmp --enable-gnutls --enable-chromaprint --enable-opencl --enable-libdrm --enable-libxml2 --enable-libass --enable-libfreetype --enable-libfribidi --enable-libfontconfig --enable-libharfbuzz --enable-libbluray --enable-libmp3lame --enable-libopus --enable-libtheora --enable-libvorbis --enable-libopenmpt --enable-libdav1d --enable-libsvtav1 --enable-libwebp --enable-libvpx --enable-libx264 --enable-libx265 --enable-libzvbi --enable-libzimg --enable-libfdk-aac --arch=arm64 --cross-prefix=/usr/bin/aarch64-linux-gnu- --toolchain=hardened --enable-cross-compile --enable-rkmpp --enable-rkrga
libavutil 59. 8.100 / 59. 8.100
libavcodec 61. 3.100 / 61. 3.100
libavformat 61. 1.100 / 61. 1.100
libavdevice 61. 1.100 / 61. 1.100
libavfilter 10. 1.100 / 10. 1.100
libswscale 8. 1.100 / 8. 1.100
libswresample 5. 1.100 / 5. 1.100
libpostproc 58. 1.100 / 58. 1.100
[mpeg2video @ 0xaaaade02c410] Invalid frame dimensions 0x0.
[mp3float @ 0xaaaade029060] Header missing
[mpeg2video @ 0xaaaade02c410] Invalid frame dimensions 0x0.
Last message repeated 4 times
[mpegts @ 0xaaaade0206b0] Could not find codec parameters for stream 4 (Unknown: none ([5][0][0][0] / 0x0005)): unknown codec
Consider increasing the value for the 'analyzeduration' (3000000) and 'probesize' (1000000000) options
Input #0, mpegts, from 'http://192.168.1.8:9981/stream/channelid/694893686?ticket=8bf29d848c58cfe3f83b3cdc79e688c67abe6f79':
Duration: N/A, start: 93936.023967, bitrate: N/A
Program 1
Metadata:
service_name : RTL Television
service_provider: RTL Deutschland
Stream #0:1[0x68](deu): Audio: mp2 (mp3float) ([3][0][0][0] / 0x0003), 48000 Hz, stereo, fltp, 192 kb/s
Stream #0:2[0x69](deu): Subtitle: dvb_teletext (libzvbi_teletextdec) ([6][0][0][0] / 0x0006), 492x250
Stream #0:3[0x6a](deu): Audio: ac3 (AC-3 / 0x332D4341), 48000 Hz, stereo, fltp, 384 kb/s
Stream #0:4[0x6c]: Unknown: none ([5][0][0][0] / 0x0005)
Stream #0:5[0x6e](deu): Subtitle: dvb_subtitle (dvbsub) ([6][0][0][0] / 0x0006) (hearing impaired)
Stream #0:6[0xa3]: Video: mpeg2video (Main) ([2][0][0][0] / 0x0002), yuv420p(tv, bt470bg, top first), 720x576 [SAR 64:45 DAR 16:9], 25 fps, 25 tbr, 90k tbn
Side data:
cpb: bitrate max/min/avg: 15000000/0/0 buffer size: 1835008 vbv_delay: N/A
No Program
Stream #0:0[0x12]: Data: epg
Stream mapping:
Stream #0:6 -> #0:0 (mpeg2video (native) -> av1 (libsvtav1))
Stream #0:1 -> #0:1 (mp2 (native) -> aac (libfdk_aac))
Press [q] to stop, [?] for help
[mp2 @ 0xaaaade067720] Header missing
[aist#0:1/mp2 @ 0xaaaade031350] [dec:mp2 @ 0xaaaade02fc90] Error submitting packet to decoder: Invalid data found when processing input
Svt[info]: -------------------------------------------
Svt[info]: SVT [version]: SVT-AV1 Encoder Lib v2.2.1
Svt[info]: SVT [build] : GCC 12.2.0 64 bit
Svt[info]: LIB Build date: Oct 25 2024 18:12:00
Svt[info]: -------------------------------------------
Svt[error]: Instance 1: The target bit rate must be between [0, 100000] kbps
[libsvtav1 @ 0xaaaade02c410] Error setting encoder parameters: bad parameter (0x80001005)
[vost#0:0/libsvtav1 @ 0xaaaade041f70] Error while opening encoder - maybe incorrect parameters such as bit_rate, rate, width or height.
[vf#0:0 @ 0xaaaade020120] Error sending frames to consumers: Invalid argument
[vf#0:0 @ 0xaaaade020120] Task finished with error code: -22 (Invalid argument)
[vf#0:0 @ 0xaaaade020120] Terminating thread with return code -22 (Invalid argument)
[vost#0:0/libsvtav1 @ 0xaaaade041f70] Could not open encoder before EOF
[vost#0:0/libsvtav1 @ 0xaaaade041f70] Task finished with error code: -22 (Invalid argument)
[vost#0:0/libsvtav1 @ 0xaaaade041f70] Terminating thread with return code -22 (Invalid argument)
[out#0/hls @ 0xaaaade02ebf0] Nothing was written into output file, because at least one of its streams received no packets.
frame= 0 fps=0.0 q=0.0 Lsize= 0KiB time=N/A bitrate=N/A speed=N/A
Conversion failed!Do you spot anything obvious here? In my configuration, I enabled these transcoding formats enabled: H264, HEVC, AV1, HEVC 10bit.
Thank you and kind regards,
Ingwie
![[Image: GitHub%20Sponsors-grey?logo=github]](https://img.shields.io/badge/GitHub%20Sponsors-grey?logo=github){kind=icon}