2023-12-09, 05:43 PM
(This post was last modified: 2023-12-09, 05:44 PM by TheDreadPirate. Edited 1 time in total.)
The iGPU is what you would be passing into the container. Your J5005 does have Quick Sync. There has to be an option to have the container use the iGPU. AFAIK, Proxmox does not do that automatically. But I don't use Proxmox so what do I know.
Also, since you are not using the official docker image, I think you need to make sure that the Proxmox host has all the Intel drivers installed. So you would have to follow the bare metal Debian instructions here. Proxmox is Debian, right?
https://jellyfin.org/docs/general/admini...linux-host
Also, since you are not using the official docker image, I think you need to make sure that the Proxmox host has all the Intel drivers installed. So you would have to follow the bare metal Debian instructions here. Proxmox is Debian, right?
https://jellyfin.org/docs/general/admini...linux-host
Jellyfin 10.9.11
Ubuntu 24.04 LTS (bare metal)
Intel i3 12100 on Asus Prime H610M-E D4 mATX
32GB DDR4-3600
Intel Arc A380
OS drive - SK Hynix P41 1TB
Storage
WD Green 3TB (Samba shares)
WD Red 3TB CMR (WIP Media, Test libraries)
3x WD Red Pro 6TB CMR in RAIDZ1 (JF Library)
Fractal Meshify 2
Corsair CX430
Ubuntu 24.04 LTS (bare metal)
Intel i3 12100 on Asus Prime H610M-E D4 mATX
32GB DDR4-3600
Intel Arc A380
OS drive - SK Hynix P41 1TB
Storage
WD Green 3TB (Samba shares)
WD Red 3TB CMR (WIP Media, Test libraries)
3x WD Red Pro 6TB CMR in RAIDZ1 (JF Library)
Fractal Meshify 2
Corsair CX430