2023-12-16, 11:56 PM
Jellyfin is only binding to the local loopback. It almost certainly isn't able to reach out to the Internet. If you have anything in "Bind to local network address" in Dashboard > Networking, remove it and just leave it blank. Jellyfin will then bind to all available interfaces.
Code:
[2023-12-16 10:07:13.540 -05:00] [INF] [1] Jellyfin.Networking.Manager.NetworkManager: Using bind addresses: ["127.0.0.1"]
Jellyfin 10.9.11
Ubuntu 24.04 LTS (bare metal)
Intel i3 12100 on Asus Prime H610M-E D4 mATX
32GB DDR4-3600
Intel Arc A380
OS drive - SK Hynix P41 1TB
Storage
WD Green 3TB (Samba shares)
WD Red 3TB CMR (WIP Media, Test libraries)
3x WD Red Pro 6TB CMR in RAIDZ1 (JF Library)
Fractal Meshify 2
Corsair CX430
Ubuntu 24.04 LTS (bare metal)
Intel i3 12100 on Asus Prime H610M-E D4 mATX
32GB DDR4-3600
Intel Arc A380
OS drive - SK Hynix P41 1TB
Storage
WD Green 3TB (Samba shares)
WD Red 3TB CMR (WIP Media, Test libraries)
3x WD Red Pro 6TB CMR in RAIDZ1 (JF Library)
Fractal Meshify 2
Corsair CX430