SOLVED: Hevc

[crick3t]

Hi everyone, I'm very new to anything other than Windows (and even there I've never particularly touched the terminal) and taking advantage of the start of the Christmas break I decided to venture into the world of homelabs, with pretty much the sole purpose to use if for Jellyfin.

I installed debian 12 and casaOS on an old laptop equipped with an i7 4720HQ and an NVIDIA 950M. From casaOS I then set the shared folder to which I linked Jellyfinn and everything works fine... If it weren't for the hardware acceleration for transcoding.

I installed the nvidia drivers and they appear correctly, I tried running the

Code:

nvidia-smi

command while transcoding a video and ffmpeg5 appears in the processes, so that should work too.
The only thing I couldn't do, which I guess is the cause of my problems, was to insert jellyfin into the render and video groups. I tried following the various online guides to do this but every time I do

Code:

ls -l /dev/dei

jellyfin doesn't appear in the groups.

I no longer know what to do, and my inability makes everything slower and more frustrating, if anyone can help me I would be extremely grateful.

PS. It's also the first time I use a forum actively, so if I did anything against the rules I'm sorry in advance