2024-01-13, 09:31 PM
(2024-01-13, 05:03 PM)merulius Wrote:(2024-01-12, 06:24 PM)TheDreadPirate Wrote: The command "jellyfin" doesn't start jellyfin properly. "sudo systemctl start jellyfin" is how you would start it, but that is failing.
Run this command and then scroll to the bottom. Copy and paste the last hundred lines or so to sourcebin and link that back here.
Code:sudo journalctl -u jellyfin
https://srcb.in/XK2QAOiUJK
I hope I have done that right.
Thanks in advance for any light you can shed.
Nothing about that log makes sense. Jellyfin.sh does not exist, period, when installed with APT.
Type this command
Code:
history
Copy and paste the contents to sourcebin (sanitize any potentially personal info), save, and link back here.
Jellyfin 10.9.11
Ubuntu 24.04 LTS (bare metal)
Intel i3 12100 on Asus Prime H610M-E D4 mATX
32GB DDR4-3600
Intel Arc A380
OS drive - SK Hynix P41 1TB
Storage
WD Green 3TB (Samba shares)
WD Red 3TB CMR (WIP Media, Test libraries)
3x WD Red Pro 6TB CMR in RAIDZ1 (JF Library)
Fractal Meshify 2
Corsair CX430
Ubuntu 24.04 LTS (bare metal)
Intel i3 12100 on Asus Prime H610M-E D4 mATX
32GB DDR4-3600
Intel Arc A380
OS drive - SK Hynix P41 1TB
Storage
WD Green 3TB (Samba shares)
WD Red 3TB CMR (WIP Media, Test libraries)
3x WD Red Pro 6TB CMR in RAIDZ1 (JF Library)
Fractal Meshify 2
Corsair CX430