2024-05-01, 03:08 PM
(This post was last modified: 2024-05-01, 03:10 PM by TheDreadPirate. Edited 1 time in total.)
Yeah. 100% usage for a single stream is normal. FFMPEG will use as much as it can get and transcoded as fast as possible. Keep in mind that it is transcoding at ~550FPS. When you start a second transcode both will transcode at the same time, but at 275FPS for each. When you start a third transcode, 184FPS. And so on.
For 1080p24 content, that speed comes out to around 20 simultaneous transcodes. 16-17 for 1080p30 content.
For 1080p24 content, that speed comes out to around 20 simultaneous transcodes. 16-17 for 1080p30 content.
Jellyfin 10.9.11
Ubuntu 24.04 LTS (bare metal)
Intel i3 12100 on Asus Prime H610M-E D4 mATX
32GB DDR4-3600
Intel Arc A380
OS drive - SK Hynix P41 1TB
Storage
WD Green 3TB (Samba shares)
WD Red 3TB CMR (WIP Media, Test libraries)
3x WD Red Pro 6TB CMR in RAIDZ1 (JF Library)
Fractal Meshify 2
Corsair CX430
Ubuntu 24.04 LTS (bare metal)
Intel i3 12100 on Asus Prime H610M-E D4 mATX
32GB DDR4-3600
Intel Arc A380
OS drive - SK Hynix P41 1TB
Storage
WD Green 3TB (Samba shares)
WD Red 3TB CMR (WIP Media, Test libraries)
3x WD Red Pro 6TB CMR in RAIDZ1 (JF Library)
Fractal Meshify 2
Corsair CX430