2024-05-10, 01:46 PM
That is what I was trying to get at when I asked whether "linux-firmware" was installed. Intel Arc requires "low power encoding" to be enabled in Jellyfin, but the HuC and GuC firmware needs to be installed via the linux-firmware package. Which TrueNAS isn't letting you install?
I was searching around and your problem is pretty common for the various Intel GPUs/iGPUs that require GuC/HuC firmware (Arc and Jasper Lake).
At this point you would be better served asking this question on the TrueNAS forum since this is not a Jellyfin problem and you aren't going to find a lot of TrueNAS experts here.
https://www.truenas.com/community/
I was searching around and your problem is pretty common for the various Intel GPUs/iGPUs that require GuC/HuC firmware (Arc and Jasper Lake).
At this point you would be better served asking this question on the TrueNAS forum since this is not a Jellyfin problem and you aren't going to find a lot of TrueNAS experts here.
https://www.truenas.com/community/
Jellyfin 10.9.11
Ubuntu 24.04 LTS (bare metal)
Intel i3 12100 on Asus Prime H610M-E D4 mATX
32GB DDR4-3600
Intel Arc A380
OS drive - SK Hynix P41 1TB
Storage
WD Green 3TB (Samba shares)
WD Red 3TB CMR (WIP Media, Test libraries)
3x WD Red Pro 6TB CMR in RAIDZ1 (JF Library)
Fractal Meshify 2
Corsair CX430
Ubuntu 24.04 LTS (bare metal)
Intel i3 12100 on Asus Prime H610M-E D4 mATX
32GB DDR4-3600
Intel Arc A380
OS drive - SK Hynix P41 1TB
Storage
WD Green 3TB (Samba shares)
WD Red 3TB CMR (WIP Media, Test libraries)
3x WD Red Pro 6TB CMR in RAIDZ1 (JF Library)
Fractal Meshify 2
Corsair CX430