2024-06-10, 12:28 AM
(This post was last modified: 2024-06-10, 12:30 AM by TheDreadPirate. Edited 1 time in total.)
If you are using the same database as when you were on 10.10, it MIGHT be borked. You may have to revert to a backup prior to when you ran 10.10 or start from scratach. Just like going from 10.8 to 10.9 is one way, same with 10.9 to 10.10.
But there is a bug in 10.9.6 that can break media identification.
https://github.com/jellyfin/jellyfin/issues/12023
This might be what is going on with you.
But there is a bug in 10.9.6 that can break media identification.
https://github.com/jellyfin/jellyfin/issues/12023
This might be what is going on with you.
Jellyfin 10.10.5 (Docker)
Ubuntu 24.04 LTS
Intel i3 12100
Intel Arc A380
OS drive - SK Hynix P41 1TB
Storage
3x WD Red Pro 6TB CMR in RAIDZ1 (JF Library)
![[Image: GitHub%20Sponsors-grey?logo=github]](https://img.shields.io/badge/GitHub%20Sponsors-grey?logo=github)
Ubuntu 24.04 LTS
Intel i3 12100
Intel Arc A380
OS drive - SK Hynix P41 1TB
Storage
3x WD Red Pro 6TB CMR in RAIDZ1 (JF Library)