2024-06-14, 03:41 PM
(This post was last modified: 2024-06-14, 03:41 PM by TheDreadPirate. Edited 1 time in total.)
Set it for the entire library to the metadata source of your choice, rescan+replace all metadata for just the one show, once that completes revert the library back to what metadata source order it was before.
AFAIK, this is the only way to do what you are asking.
Also make sure that real time monitoring is NOT enabled.
AFAIK, this is the only way to do what you are asking.
Also make sure that real time monitoring is NOT enabled.
Jellyfin 10.9.11
Ubuntu 24.04 LTS (bare metal)
Intel i3 12100 on Asus Prime H610M-E D4 mATX
32GB DDR4-3600
Intel Arc A380
OS drive - SK Hynix P41 1TB
Storage
WD Green 3TB (Samba shares)
WD Red 3TB CMR (WIP Media, Test libraries)
3x WD Red Pro 6TB CMR in RAIDZ1 (JF Library)
Fractal Meshify 2
Corsair CX430
Ubuntu 24.04 LTS (bare metal)
Intel i3 12100 on Asus Prime H610M-E D4 mATX
32GB DDR4-3600
Intel Arc A380
OS drive - SK Hynix P41 1TB
Storage
WD Green 3TB (Samba shares)
WD Red 3TB CMR (WIP Media, Test libraries)
3x WD Red Pro 6TB CMR in RAIDZ1 (JF Library)
Fractal Meshify 2
Corsair CX430