2024-06-20, 10:15 PM
If you MUST avoid transcoding, or even remuxing (#1), you should have H264 video, AAC stereo audio, SRT or burned in subs, in a MP4 container.
Or you could allow transcoding if your hardware supports it. Allowing remuxing (changing containers without re-encoding) uses almost not CPU power.
What are your hardware specs?
Or you could allow transcoding if your hardware supports it. Allowing remuxing (changing containers without re-encoding) uses almost not CPU power.
What are your hardware specs?
Jellyfin 10.9.11
Ubuntu 24.04 LTS (bare metal)
Intel i3 12100 on Asus Prime H610M-E D4 mATX
32GB DDR4-3600
Intel Arc A380
OS drive - SK Hynix P41 1TB
Storage
WD Green 3TB (Samba shares)
WD Red 3TB CMR (WIP Media, Test libraries)
3x WD Red Pro 6TB CMR in RAIDZ1 (JF Library)
Fractal Meshify 2
Corsair CX430
Ubuntu 24.04 LTS (bare metal)
Intel i3 12100 on Asus Prime H610M-E D4 mATX
32GB DDR4-3600
Intel Arc A380
OS drive - SK Hynix P41 1TB
Storage
WD Green 3TB (Samba shares)
WD Red 3TB CMR (WIP Media, Test libraries)
3x WD Red Pro 6TB CMR in RAIDZ1 (JF Library)
Fractal Meshify 2
Corsair CX430