2024-07-09, 07:41 PM
(This post was last modified: 2024-07-09, 07:41 PM by TheDreadPirate.)
Follow our QSV setup docs.
https://jellyfin.org/docs/general/admini...ndows-host
There are a couple extra steps you need to do other than selecting QSV from the HWA drop down. Like the group policy change in step 3.
You will also need to select the appropriate codecs that your N100 supports decoding and encoding. Use this table to aid in selecting the right boxes.
https://en.wikipedia.org/wiki/Intel_Quic...d_encoding
Your iGPU supports tone mapping so select those boxes. Also, I'm pretty sure you can check Low Power encoding without having to do any additional setup.
https://jellyfin.org/docs/general/admini...ndows-host
There are a couple extra steps you need to do other than selecting QSV from the HWA drop down. Like the group policy change in step 3.
You will also need to select the appropriate codecs that your N100 supports decoding and encoding. Use this table to aid in selecting the right boxes.
https://en.wikipedia.org/wiki/Intel_Quic...d_encoding
Your iGPU supports tone mapping so select those boxes. Also, I'm pretty sure you can check Low Power encoding without having to do any additional setup.
Jellyfin 10.10.7 (Docker)
Ubuntu 24.04.2 LTS w/HWE
Intel i3 12100
Intel Arc A380
OS drive - SK Hynix P41 1TB
Storage
4x WD Red Pro 6TB CMR in RAIDZ1
![[Image: GitHub%20Sponsors-grey?logo=github]](https://img.shields.io/badge/GitHub%20Sponsors-grey?logo=github)
Ubuntu 24.04.2 LTS w/HWE
Intel i3 12100
Intel Arc A380
OS drive - SK Hynix P41 1TB
Storage
4x WD Red Pro 6TB CMR in RAIDZ1