2023-08-27, 04:47 PM
Can you share your ffmpeg logs with us? That will help us check if it is trying to transcode on the CPU instead of the GPU.
Also, follow the guide here for setting up and configuring QSV. Note "Known limitations #1". And the Linux container setup guide further down. Make sure you are passing your GPU render device into the container.
https://jellyfin.org/docs/general/admini...nux-setups
Also, follow the guide here for setting up and configuring QSV. Note "Known limitations #1". And the Linux container setup guide further down. Make sure you are passing your GPU render device into the container.
https://jellyfin.org/docs/general/admini...nux-setups
Jellyfin 10.9.11
Ubuntu 24.04 LTS (bare metal)
Intel i3 12100 on Asus Prime H610M-E D4 mATX
32GB DDR4-3600
Intel Arc A380
OS drive - SK Hynix P41 1TB
Storage
WD Green 3TB (Samba shares)
WD Red 3TB CMR (WIP Media, Test libraries)
3x WD Red Pro 6TB CMR in RAIDZ1 (JF Library)
Fractal Meshify 2
Corsair CX430
Ubuntu 24.04 LTS (bare metal)
Intel i3 12100 on Asus Prime H610M-E D4 mATX
32GB DDR4-3600
Intel Arc A380
OS drive - SK Hynix P41 1TB
Storage
WD Green 3TB (Samba shares)
WD Red 3TB CMR (WIP Media, Test libraries)
3x WD Red Pro 6TB CMR in RAIDZ1 (JF Library)
Fractal Meshify 2
Corsair CX430