2024-08-15, 03:05 PM
(This post was last modified: 2024-08-15, 03:07 PM by TheDreadPirate.)
There is a separate log file that is generated when ffmpeg is run for transcoding. They are in the same directory as the main jellyfin log and the file names all start with "FFmpeg".
A couple of things, though. From the log you have provided, you enabled AV1 transcoding. Your CPU is not able to handle software transcoding to AV1. Nor HEVC. Uncheck both of those and it will transcode to H264 which your CPU should be able to reasonably handle.
A couple of things, though. From the log you have provided, you enabled AV1 transcoding. Your CPU is not able to handle software transcoding to AV1. Nor HEVC. Uncheck both of those and it will transcode to H264 which your CPU should be able to reasonably handle.
Jellyfin 10.9.11
Ubuntu 24.04 LTS (bare metal)
Intel i3 12100 on Asus Prime H610M-E D4 mATX
32GB DDR4-3600
Intel Arc A380
OS drive - SK Hynix P41 1TB
Storage
WD Green 3TB (Samba shares)
WD Red 3TB CMR (WIP Media, Test libraries)
3x WD Red Pro 6TB CMR in RAIDZ1 (JF Library)
Fractal Meshify 2
Corsair CX430
Ubuntu 24.04 LTS (bare metal)
Intel i3 12100 on Asus Prime H610M-E D4 mATX
32GB DDR4-3600
Intel Arc A380
OS drive - SK Hynix P41 1TB
Storage
WD Green 3TB (Samba shares)
WD Red 3TB CMR (WIP Media, Test libraries)
3x WD Red Pro 6TB CMR in RAIDZ1 (JF Library)
Fractal Meshify 2
Corsair CX430