2023-08-28, 02:49 PM
At least there is a log. And the startup looks clean.
Make sure your network is set to private. Also try manually creating firewall rules for port 8096.
Can you check Resource Monitor for jellyfin process listening on port 8096? Even without any active connections you should see entries for "IPv4 loopback".
Task Manager > Resource Monitor > Network tab
Make sure your network is set to private. Also try manually creating firewall rules for port 8096.
Can you check Resource Monitor for jellyfin process listening on port 8096? Even without any active connections you should see entries for "IPv4 loopback".
Task Manager > Resource Monitor > Network tab
Jellyfin 10.9.11
Ubuntu 24.04 LTS (bare metal)
Intel i3 12100 on Asus Prime H610M-E D4 mATX
32GB DDR4-3600
Intel Arc A380
OS drive - SK Hynix P41 1TB
Storage
WD Green 3TB (Samba shares)
WD Red 3TB CMR (WIP Media, Test libraries)
3x WD Red Pro 6TB CMR in RAIDZ1 (JF Library)
Fractal Meshify 2
Corsair CX430
Ubuntu 24.04 LTS (bare metal)
Intel i3 12100 on Asus Prime H610M-E D4 mATX
32GB DDR4-3600
Intel Arc A380
OS drive - SK Hynix P41 1TB
Storage
WD Green 3TB (Samba shares)
WD Red 3TB CMR (WIP Media, Test libraries)
3x WD Red Pro 6TB CMR in RAIDZ1 (JF Library)
Fractal Meshify 2
Corsair CX430