2024-08-20, 11:22 PM
A workaround to force transcoding is to use the quality selector and set the bit rate below the video's native bit rate. If you have a 10Mbps video, for example, and you select 15Mbps nothing will happen. Selecting 8Mbps will trigger a transcode.
So figure out the bit rate for your video and select just below that value.
I will do some testing tonight or tomorrow morning and get back to you.
So figure out the bit rate for your video and select just below that value.
I will do some testing tonight or tomorrow morning and get back to you.
Jellyfin 10.9.11
Ubuntu 24.04 LTS (bare metal)
Intel i3 12100 on Asus Prime H610M-E D4 mATX
32GB DDR4-3600
Intel Arc A380
OS drive - SK Hynix P41 1TB
Storage
WD Green 3TB (Samba shares)
WD Red 3TB CMR (WIP Media, Test libraries)
3x WD Red Pro 6TB CMR in RAIDZ1 (JF Library)
Fractal Meshify 2
Corsair CX430
Ubuntu 24.04 LTS (bare metal)
Intel i3 12100 on Asus Prime H610M-E D4 mATX
32GB DDR4-3600
Intel Arc A380
OS drive - SK Hynix P41 1TB
Storage
WD Green 3TB (Samba shares)
WD Red 3TB CMR (WIP Media, Test libraries)
3x WD Red Pro 6TB CMR in RAIDZ1 (JF Library)
Fractal Meshify 2
Corsair CX430