2024-08-28, 03:17 PM
(This post was last modified: 2024-08-28, 03:18 PM by TheDreadPirate. Edited 1 time in total.)
I had assumed this would be like a 50-60Mbps 4K remux or something. 1.7Mbps should be easy.
On another PC on your LAN use traceroute to see if traffic stays local.
Circling back to transcoding. Took a look again at your screenshot, update it to this.
Decoding codecs: Check all the boxes except VP8 and VC-1.
Check both low power encoding boxes. It is required for Arc.
Check Allow encoding in HEVC and AV1.
Check both VPP tone mapping and tone mapping.
Recommendations:
Enable transcode throttling
Enable delete segments.
On another PC on your LAN use traceroute to see if traffic stays local.
Circling back to transcoding. Took a look again at your screenshot, update it to this.
Decoding codecs: Check all the boxes except VP8 and VC-1.
Check both low power encoding boxes. It is required for Arc.
Check Allow encoding in HEVC and AV1.
Check both VPP tone mapping and tone mapping.
Recommendations:
Enable transcode throttling
Enable delete segments.
Jellyfin 10.10.7 (Docker)
Ubuntu 24.04.2 LTS w/HWE
Intel i3 12100
Intel Arc A380
OS drive - SK Hynix P41 1TB
Storage
4x WD Red Pro 6TB CMR in RAIDZ1
![[Image: GitHub%20Sponsors-grey?logo=github]](https://img.shields.io/badge/GitHub%20Sponsors-grey?logo=github)
Ubuntu 24.04.2 LTS w/HWE
Intel i3 12100
Intel Arc A380
OS drive - SK Hynix P41 1TB
Storage
4x WD Red Pro 6TB CMR in RAIDZ1