2024-09-03, 05:42 PM
1) You need to set a static IP address for your server. It did change LAN IPs. It was 192.168.1.46, but it is now .48.
2) After you set a static IP for the server, you need to disable automatic port mapping and manually set the port forwarding in your router.
3) Are you using TailScale? I see this line, which tells me you are.
4) Are you on the same network as the server? Or are you using TailScale to remotely access Jellyfin?
Can you share the contents of this file?
C:\Program Data\Jellyfin\Server\config\network.xml
2) After you set a static IP for the server, you need to disable automatic port mapping and manually set the port forwarding in your router.
3) Are you using TailScale? I see this line, which tells me you are.
Code:
[2024-09-03 10:49:10.651 +06:00] [INF] [14] Jellyfin.Networking.Manager.NetworkManager: Filtered subnets: ["100.64.0.0/10"]
4) Are you on the same network as the server? Or are you using TailScale to remotely access Jellyfin?
Can you share the contents of this file?
C:\Program Data\Jellyfin\Server\config\network.xml
Jellyfin 10.9.11
Ubuntu 24.04 LTS (bare metal)
Intel i3 12100 on Asus Prime H610M-E D4 mATX
32GB DDR4-3600
Intel Arc A380
OS drive - SK Hynix P41 1TB
Storage
WD Green 3TB (Samba shares)
WD Red 3TB CMR (WIP Media, Test libraries)
3x WD Red Pro 6TB CMR in RAIDZ1 (JF Library)
Fractal Meshify 2
Corsair CX430
Ubuntu 24.04 LTS (bare metal)
Intel i3 12100 on Asus Prime H610M-E D4 mATX
32GB DDR4-3600
Intel Arc A380
OS drive - SK Hynix P41 1TB
Storage
WD Green 3TB (Samba shares)
WD Red 3TB CMR (WIP Media, Test libraries)
3x WD Red Pro 6TB CMR in RAIDZ1 (JF Library)
Fractal Meshify 2
Corsair CX430