2024-09-18, 03:52 PM
(This post was last modified: 2024-09-18, 03:53 PM by TheDreadPirate. Edited 1 time in total.)
The correct path should be
/sys/kernel/debug/dri/1/gt0/uc/guc_info # and huc_info
The error you're getting is probably due to low power encoding not being fully setup. But I'd need the full log to see what command it was trying to run. For the record, your iGPU only supports low power encoding for H264.
/sys/kernel/debug/dri/1/gt0/uc/guc_info # and huc_info
The error you're getting is probably due to low power encoding not being fully setup. But I'd need the full log to see what command it was trying to run. For the record, your iGPU only supports low power encoding for H264.
Jellyfin 10.9.11
Ubuntu 24.04 LTS (bare metal)
Intel i3 12100 on Asus Prime H610M-E D4 mATX
32GB DDR4-3600
Intel Arc A380
OS drive - SK Hynix P41 1TB
Storage
WD Green 3TB (Samba shares)
WD Red 3TB CMR (WIP Media, Test libraries)
3x WD Red Pro 6TB CMR in RAIDZ1 (JF Library)
Fractal Meshify 2
Corsair CX430
Ubuntu 24.04 LTS (bare metal)
Intel i3 12100 on Asus Prime H610M-E D4 mATX
32GB DDR4-3600
Intel Arc A380
OS drive - SK Hynix P41 1TB
Storage
WD Green 3TB (Samba shares)
WD Red 3TB CMR (WIP Media, Test libraries)
3x WD Red Pro 6TB CMR in RAIDZ1 (JF Library)
Fractal Meshify 2
Corsair CX430