2024-10-07, 03:43 PM
You still have AV1 encoding enabled.
What did you disable? There are two AV1 settings. One for decoding and one for encoding. See my screenshot below. The box at the top is for DECODING, which the N100 supports, and the bottom box, labeled "Allow encoding in AV1 format", is for encoding, which the N100 does not support.
Code:
-codec:v:0 av1_qsvWhat did you disable? There are two AV1 settings. One for decoding and one for encoding. See my screenshot below. The box at the top is for DECODING, which the N100 supports, and the bottom box, labeled "Allow encoding in AV1 format", is for encoding, which the N100 does not support.
Jellyfin 10.10.3 (Docker)
Ubuntu 24.04 LTS
Intel i3 12100
Intel Arc A380
OS drive - SK Hynix P41 1TB
Storage
3x WD Red Pro 6TB CMR in RAIDZ1 (JF Library)
![[Image: GitHub%20Sponsors-grey?logo=github]](https://img.shields.io/badge/GitHub%20Sponsors-grey?logo=github)
Ubuntu 24.04 LTS
Intel i3 12100
Intel Arc A380
OS drive - SK Hynix P41 1TB
Storage
3x WD Red Pro 6TB CMR in RAIDZ1 (JF Library)