2024-11-05, 10:05 AM
(This post was last modified: 2024-11-05, 02:45 PM by Celvin238. Edited 6 times in total.)
Ok!
I wanted to install the current version of JellyFin (10.10.1) manually (Container Manager, create project...) and integrated the commands to map the iGPU.
(renderD128...)
The installation went smoothly and I was able to transfer all metadata by copying the “cache” and “config” folders from the original container. :-)
However, when I start JellyFin and activate hardware acceleration in the menue "Transcoding", the following error message appears when playing videos:
"Playback has failed due to a fatal player error."
My settings for hardware acceleration are:
- Intel QuickSync
- Enable hardware decoding for all codecs except AV1
- Hardware encoding options: Enable hardware encoding: yes, Enable Intel low-power hardware encoder for H.264: no, Enable Intel low-power hardware encoder for HEVC: yes
- Encoding format options: Allow encoding in HEVC format: yes, Allow encoding in AV1 format: no
- Enable VPP tone mapping: no
- Enable tone mapping: no
All of the following options: no, except “Allow parallel extraction of subtitles”
When I install and configure version 10.8.11 in exactly the same way, no error message appears and the hardware acceleration works fine (I can see this in the log files).
Maybe you know what the problem could be?
I wanted to install the current version of JellyFin (10.10.1) manually (Container Manager, create project...) and integrated the commands to map the iGPU.
(renderD128...)
The installation went smoothly and I was able to transfer all metadata by copying the “cache” and “config” folders from the original container. :-)
However, when I start JellyFin and activate hardware acceleration in the menue "Transcoding", the following error message appears when playing videos:
"Playback has failed due to a fatal player error."
My settings for hardware acceleration are:
- Intel QuickSync
- Enable hardware decoding for all codecs except AV1
- Hardware encoding options: Enable hardware encoding: yes, Enable Intel low-power hardware encoder for H.264: no, Enable Intel low-power hardware encoder for HEVC: yes
- Encoding format options: Allow encoding in HEVC format: yes, Allow encoding in AV1 format: no
- Enable VPP tone mapping: no
- Enable tone mapping: no
All of the following options: no, except “Allow parallel extraction of subtitles”
When I install and configure version 10.8.11 in exactly the same way, no error message appears and the hardware acceleration works fine (I can see this in the log files).
Maybe you know what the problem could be?