2024-12-29, 10:12 PM
(This post was last modified: 2024-12-29, 10:13 PM by TheDreadPirate. Edited 1 time in total.)
What is the goal of your wireguard setup? Is it only for Jellyfin? Or is it also for routing ALL internet traffic through it?
If the goal is to route JUST jellyfin through wireguard, or remote system access, you need to change "AllowedIPs" to 10.6.0.0/16. And remove the DNS line.
Since your TrueNAS host is already on the same LAN as the Wireguard server, having DNS set and "AllowedIPs" to 0.0.0.0 is a bit pointless.
If the goal is to route JUST jellyfin through wireguard, or remote system access, you need to change "AllowedIPs" to 10.6.0.0/16. And remove the DNS line.
Since your TrueNAS host is already on the same LAN as the Wireguard server, having DNS set and "AllowedIPs" to 0.0.0.0 is a bit pointless.
Jellyfin 10.10.3 (Docker)
Ubuntu 24.04 LTS
Intel i3 12100
Intel Arc A380
OS drive - SK Hynix P41 1TB
Storage
3x WD Red Pro 6TB CMR in RAIDZ1 (JF Library)
![[Image: GitHub%20Sponsors-grey?logo=github]](https://img.shields.io/badge/GitHub%20Sponsors-grey?logo=github)
Ubuntu 24.04 LTS
Intel i3 12100
Intel Arc A380
OS drive - SK Hynix P41 1TB
Storage
3x WD Red Pro 6TB CMR in RAIDZ1 (JF Library)