2025-01-19, 12:42 PM
(This post was last modified: 2025-01-19, 06:45 PM by estarna. Edited 4 times in total.)
Hi there, after a few trials & errors, the QPKG that I was using seemed to be the problem. There was no custom ffmpeg included, only an old 5.x basic version. I had to update to the newest official 7.x QNAP version which was still not (again) a custom ffmpeg for Jellyfin. It worked well & Jellyfin was running it fine, but no hardware transcoding.
For reference, the QPKG package that I have been using for a while:
https://www.myqnap.org/?s=jellyfin.
Stable and smaller in size. As long as you do not need to transcode, which was my case until recently, It works well.
If you need transcoding, this is the one to get:
https://github.com/pdulvp/jellyfin-qnap
This one includes up to date custom FFmpeg for Jellyfin and works right away.
So I recommend this one overall, since it works fine and is it more up to date.
Hope this helps someone.
@TheDreadPirate, thanks a lot for you quick responses.
Regards, Eric
For reference, the QPKG package that I have been using for a while:
https://www.myqnap.org/?s=jellyfin.
Stable and smaller in size. As long as you do not need to transcode, which was my case until recently, It works well.
If you need transcoding, this is the one to get:
https://github.com/pdulvp/jellyfin-qnap
This one includes up to date custom FFmpeg for Jellyfin and works right away.
So I recommend this one overall, since it works fine and is it more up to date.
Hope this helps someone.
@TheDreadPirate, thanks a lot for you quick responses.
Regards, Eric
