2025-01-30, 03:26 PM
(This post was last modified: 2025-01-30, 03:27 PM by telepathicChimp. Edited 2 times in total.)
Hey! Thank you so much for all your help. I was away because I sold my RPis for an Intel N150 Beelink S13 Mini-PC, installed Ubuntu Desktop on it (I also wanted to set up Steam Link), then spent many hours figuring out why Ubuntu couldn't recognize the Alder Lake iGPU (turns out I just had to install either kernel version 6.11 or newer or just install Ubuntu 24.10 instead of 24.04... I feel the need to make a post somewhere about this because of the amount of time I invested in figuring it out, although I'm sure others have made similar posts elsewhere).
I simplified my setup by
- disabling https on my home server,
- removing Nginx configurations on my home server (since I don't technically need it... at least not yet, might want to enable remote ssh eventually for other reasons),
- only port-forwarding to 8096,
- disabling uPnP,
- having my DO server reroute to 8096 on my home server.
Now I'm looking into WireGuard to protect traffic between my DO server and my home IP address. If you have any tips or anything on that, I would greatly appreciate it!
I simplified my setup by
- disabling https on my home server,
- removing Nginx configurations on my home server (since I don't technically need it... at least not yet, might want to enable remote ssh eventually for other reasons),
- only port-forwarding to 8096,
- disabling uPnP,
- having my DO server reroute to 8096 on my home server.
Now I'm looking into WireGuard to protect traffic between my DO server and my home IP address. If you have any tips or anything on that, I would greatly appreciate it!