2025-02-12, 08:37 PM
(This post was last modified: 2025-02-12, 08:54 PM by theguymadmax. Edited 2 times in total.)
Worked when i tried it.
Before (on Auto):
After setting it to AC3:
Also, like gnattu mentioned JMP has it's own audio settings. Go to settings then client settings, from there you can try to pass-through AC3, if your outputting via HDMI. (that shouldn't make a difference if your source is AAC, but wanted you to know about the options in that menu)
Before (on Auto):
Code:
Stream #0:0(eng): Video: h264 (High), yuv420p(progressive), 1920x800 [SAR 1:1 DAR 12:5], 23.98 fps, 23.98 tbr, 1k tbn (default)
Stream #0:1(eng): Audio: ac3, 48000 Hz, 5.1(side), fltp, 640 kb/s (default)
Stream #0:2(eng): Subtitle: subrip (srt)
Metadata:
title : English regular
Stream #0:3(eng): Subtitle: subrip (srt)
Metadata:
title : English sdh
Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_qsv))
Stream #0:1 -> #0:1 (ac3 (native) -> aac (libfdk_aac))
Press [q] to stop, [?] for help
Output #0, hls, to '/cache/transcodes/302859ceecd538c0250b1ab989142974.m3u8':
Metadata:
encoder : Lavf61.1.100
Stream #0:0: Video: h264, qsv(bt709, progressive), 1920x800 [SAR 1:1 DAR 12:5], q=2-31, 2552 kb/s, 23.98 fps, 90k tbn (default)
Metadata:
encoder : Lavc61.3.100 h264_qsv
Side data:
cpb: bitrate max/min/avg: 2552000/0/2552000 buffer size: 5104000 vbv_delay: N/A
Stream #0:1: Audio: aac, 48000 Hz, 5.1, s16, 448 kb/s (default)
Metadata:
encoder : Lavc61.3.100 libfdk_aac
[hls @ 0x62a513a85040] Opening '/cache/transcodes/302859ceecd538c0250b1ab9891429740.ts' for writing
frame= 88 fps=0.0 q=20.0 size=N/A time=00:00:00.00 bitrate=N/A speed= 0x After setting it to AC3:
Code:
Stream #0:0(eng): Video: h264 (High), yuv420p(progressive), 1920x800 [SAR 1:1 DAR 12:5], 23.98 fps, 23.98 tbr, 1k tbn (default)
Stream #0:1(eng): Audio: ac3, 48000 Hz, 5.1(side), fltp, 640 kb/s (default)
Stream #0:2(eng): Subtitle: subrip (srt)
Metadata:
title : English regular
Stream #0:3(eng): Subtitle: subrip (srt)
Metadata:
title : English sdh
Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_qsv))
Stream #0:1 -> #0:1 (ac3 (native) -> ac3 (native))
Press [q] to stop, [?] for help
Output #0, hls, to '/cache/transcodes/5c7eaf63c3a38adfa6de10bdb483d653.m3u8':
Metadata:
encoder : Lavf61.1.100
Stream #0:0: Video: h264, qsv(bt709, progressive), 1920x800 [SAR 1:1 DAR 12:5], q=2-31, 2552 kb/s, 23.98 fps, 90k tbn (default)
Metadata:
encoder : Lavc61.3.100 h264_qsv
Side data:
cpb: bitrate max/min/avg: 2552000/0/2552000 buffer size: 5104000 vbv_delay: N/A
Stream #0:1: Audio: ac3, 48000 Hz, 5.1(side), fltp, 448 kb/s (default)
Metadata:
encoder : Lavc61.3.100 ac3
[hls @ 0x5d6346b12040] Opening '/cache/transcodes/5c7eaf63c3a38adfa6de10bdb483d6530.ts' for writing
frame= 140 fps=0.0 q=21.0 size=N/A time=00:00:00.00 bitrate=N/A speed= 0x
[hls @ 0x5d6346b12040] Opening '/cache/transcodes/5c7eaf63c3a38adfa6de10bdb483d6531.ts' for writing
[hls @ 0x5d6346b12040] Opening '/cache/transcodes/5c7eaf63c3a38adfa6de10bdb483d6532.ts' for writing
frame= 283 fps=283 q=29.0 size=N/A time=00:00:05.96 bitrate=N/A speed=5.96xAlso, like gnattu mentioned JMP has it's own audio settings. Go to settings then client settings, from there you can try to pass-through AC3, if your outputting via HDMI. (that shouldn't make a difference if your source is AAC, but wanted you to know about the options in that menu)