2025-02-23, 12:56 AM
Hello,
I’m currently running Jellyfin on a Beelink EQ12 mini PC with the following configuration:
Processor: Intel ALD_N N100
RAM: 1x16GB DDR5 4800MHz
Ethernet: 2x2.5Gbps
Disk: LNM620X001 (1TB)
Jellyfin is operating as a Docker container on Proxmox. In addition, I have two other services (Immich and Planka) running in Docker containers. My initial plan was to use this low-power device as an always-on application server, while my HPE ProLiant Gen10 Plus serves as a storage server (NAS). To achieve this, I configured the Jellyfin container to access media data on the HPE server using SAMBA.
Given this setup, I’d like to know if this is the best configuration in terms of performance and local media playback speed.
Over the past few days, I’ve encountered numerous issues with subtitles being out of sync and occasional audio problems. These issues do not occur when I play media through my desktop browser, but they do appear on my TV and iPhone.
I have tried standardizing my media by converting all files to “.mp4” with H.264 or H.265 for video and AAC for audio, and I’ve removed internal subtitles where available. Do you think this is a good approach?
Ultimately, since the problems persist, I’m considering purchasing a more powerful computer with a dedicated GPU. However, I’m also concerned that the issues might be related to other factors, such as my WiFi or the router’s capacity to handle the data.
If anyone can help, I’m happy to provide additional information if needed.
Thank you!
I’m currently running Jellyfin on a Beelink EQ12 mini PC with the following configuration:
Processor: Intel ALD_N N100
RAM: 1x16GB DDR5 4800MHz
Ethernet: 2x2.5Gbps
Disk: LNM620X001 (1TB)
Jellyfin is operating as a Docker container on Proxmox. In addition, I have two other services (Immich and Planka) running in Docker containers. My initial plan was to use this low-power device as an always-on application server, while my HPE ProLiant Gen10 Plus serves as a storage server (NAS). To achieve this, I configured the Jellyfin container to access media data on the HPE server using SAMBA.
Given this setup, I’d like to know if this is the best configuration in terms of performance and local media playback speed.
Over the past few days, I’ve encountered numerous issues with subtitles being out of sync and occasional audio problems. These issues do not occur when I play media through my desktop browser, but they do appear on my TV and iPhone.
I have tried standardizing my media by converting all files to “.mp4” with H.264 or H.265 for video and AAC for audio, and I’ve removed internal subtitles where available. Do you think this is a good approach?
Ultimately, since the problems persist, I’m considering purchasing a more powerful computer with a dedicated GPU. However, I’m also concerned that the issues might be related to other factors, such as my WiFi or the router’s capacity to handle the data.
If anyone can help, I’m happy to provide additional information if needed.
Thank you!