9 hours ago
(This post was last modified: 9 hours ago by Remotepall. Edited 2 times in total.)
Went with Mainline as the standard wasn't pushing any higher, I can't remember the exact number at the moment, but if I needed 6.12 for battlemage it was only giving 6.11. As for why so high, "bigger number gooderer" is my only rational. Can roll it back if needed. Today I was going to look into https://github com/intel/vpl-gpu-rt and compile it.
(Yesterday, 02:25 PM)Host-in-the-Shell Wrote: I have an Intel Arc A380, ... Debian 12. ... after a kernel update and a reboot, the GPU "disappears" too. ... turn off the server entirely and then power it back on.... the card shows up again.I believe that this got my machine to the current state where the device can be seen in /dev/dri/ but issue now is that it doesn't seem to be able to be used to render files.
Jellyfin Server: JF: 10.10.6, AMD Ryzen 5 5500 Gigabyte B450M DS3H, Intel Arc B570 Battlemage 10GB GPU, 16GB 3600MHz DDR4, 1TB Lexar NVMe Gen4 SSD.
Unraid Storage: Unraid 7.0.0, HP Proliant ML150 Gen 9, E5-2630, 32GB DDR4 ECC, 27TB, 2p5d
Unraid Storage: Unraid 7.0.0, HP Proliant ML150 Gen 9, E5-2630, 32GB DDR4 ECC, 27TB, 2p5d