2025-03-19, 02:07 PM
(This post was last modified: 2025-03-19, 02:08 PM by TheDreadPirate. Edited 1 time in total.)
I am pretty sure what you are doing is probably the best/only solution. Unless your provider neatly provides chapter markers (probably not).
Having said that, could you share your script? I know at least one person on the forum that had a similar use case.
Is it run outside of Jellyfin? Or is it set as the post-processing script in the Jellyfin DVR settings?
Regarding need to scan your library, is your storage a network share or locally attached disk? If it is a local disk, you can enable real time monitoring for the recordings library. This has worked well for my recordings. Though my post processing only involves remuxing from TS to MP4.
Having said that, could you share your script? I know at least one person on the forum that had a similar use case.
Is it run outside of Jellyfin? Or is it set as the post-processing script in the Jellyfin DVR settings?
Regarding need to scan your library, is your storage a network share or locally attached disk? If it is a local disk, you can enable real time monitoring for the recordings library. This has worked well for my recordings. Though my post processing only involves remuxing from TS to MP4.
Jellyfin 10.10.7 (Docker)
Ubuntu 24.04.2 LTS w/HWE
Intel i3 12100
Intel Arc A380
OS drive - SK Hynix P41 1TB
Storage
4x WD Red Pro 6TB CMR in RAIDZ1
![[Image: GitHub%20Sponsors-grey?logo=github]](https://img.shields.io/badge/GitHub%20Sponsors-grey?logo=github)
Ubuntu 24.04.2 LTS w/HWE
Intel i3 12100
Intel Arc A380
OS drive - SK Hynix P41 1TB
Storage
4x WD Red Pro 6TB CMR in RAIDZ1