SOLVED: Intel QSV transcode error

[TheDreadPirate]

Can you show me a screenshot of Dashboard > Playback > Transcoding? Based on the ffmpeg command from your log, it looks like you put /dev/dri/renderD128 in the QSV device field. This field should be blank since you only have one Intel GPU in your system. IIRC, if you did have more than one Intel device you would put the index number for the desired QSV device. Like 0, 1, 2, etc.

/dev/dri/renderD128 would only be used for VAAPI.

When the QSV device field is left blank this is what is populated in the ffmpeg log and works properly.

Code:

vaapi=va:,vendor_id=0x8086,driver=iHD