SOLVED: QUESTION:

[Shifk]

Hi all!

I am a new user who recently discovered Jellyfin and jumped into setting-up a server.

First of all, I will describe my environment:

- I have a raspberry-like mini computer with 8Gb of RAM and Intel N3450 CPU, with an integrated GPU Intel 500 series.
- Debian 11 as OS.
- Jellyfin is running on a Docker container.
- I have the following docker-compose.yml file:

Code:

version: "2.1"
services:
########################################################### Jellyfin
  jellyfin:
    image: lscr.io/linuxserver/jellyfin:latest
    container_name: jellyfin
    environment:
      - PUID=0
      - PGID=0
      - DOCKER_MODS=linuxserver/mods:jellyfin-opencl-intel # Recommended on setup guide
      # - JELLYFIN_PublishedServerUrl=192.168.0.5 #optional
    devices:
      - /dev/dri:/dev/dri  # Path to graphic card
    volumes:
      - /path/to/config/jellyfin:/config
    ports:
      - 8096:8096
    # - 8920:8920 #optional
    # - 7359:7359/udp #optional
    # - 1900:1900/udp #optional
    restart: unless-stopped

I've also attached a small log-file generated when I play some video.

So, my question is: Am I setting up correctly the hardware acceleration?

Whenever I play any video, my CPU goes to 100%, and the video pauses every few seconds, while the same video runs smoothly on Plex with the same setup, and thats the reason why I think that I am doing something bad.

Thank you very much for your attention!