2024-04-17, 08:10 AM
Hello,
I did precise what was the cause of the problem. I used
Probable causes : disk problem, cable problem, powered hub problem.
Do you know by chance anyone who used a Raspberry PI with a powered hub and encountered those kind of issues ?
I keep going with the investigation.
I did precise what was the cause of the problem. I used
dmseg
to find out if I had I/O errors, and that was it. This was due to a failure reading the file from my HDD drives, which is plugged to powered USB port, which is plugged to my Raspberry PI 4b.Probable causes : disk problem, cable problem, powered hub problem.
Do you know by chance anyone who used a Raspberry PI with a powered hub and encountered those kind of issues ?
I keep going with the investigation.
Software :
Jellyfin 10.8.13
Docker container, image : lscr.io
Hardware :
Raspbian / Raspberry PI 4B 8GB RAM
OS drive - KINGSTON A400 SSD
Storage :
SABRENT HUB USB 4 ports 5V / 2.5A + mergerfs
TOSHIBA 4TB
Clients : NVIDIA Shield, Phone, IPad, PC, Xiaomi Box (max 3 together)
Jellyfin 10.8.13
Docker container, image : lscr.io
Hardware :
Raspbian / Raspberry PI 4B 8GB RAM
OS drive - KINGSTON A400 SSD
Storage :
SABRENT HUB USB 4 ports 5V / 2.5A + mergerfs
TOSHIBA 4TB
Clients : NVIDIA Shield, Phone, IPad, PC, Xiaomi Box (max 3 together)