2024-10-17, 04:18 PM
(This post was last modified: 2024-10-17, 04:21 PM by alleycat. Edited 1 time in total.)
After reading a lot of documentation on hardware transcoding, I'm wondering if I have my A310 setup correctly. This is my first "homelab project" for video files and transcoding. I'm sure there are a handful of Ubuntu cli commands that I could run to make sure I'm setup and working correctly. Not sure if I know all of them. This is how I have the Jellyfin gui setup:
(The top of the screen grab was chopped off. I have it set for Intel Quicksync (QSV))
What else should I be looking at?
(The top of the screen grab was chopped off. I have it set for Intel Quicksync (QSV))
What else should I be looking at?
.
Jellyfin 10.9.11 (bare metal), Ubuntu 24.04.1 LTS 6.8.0-47-generic (bare metal)
Dell OptiPlex 7050, Intel i7-6700 3.4GHz, 16GB ram, OS 1TB NVMe,
Intel Arc A310 ELF, Storage: TrueNas Scale 21TiB (Samba shares)
Jellyfin 10.9.11 (bare metal), Ubuntu 24.04.1 LTS 6.8.0-47-generic (bare metal)
Dell OptiPlex 7050, Intel i7-6700 3.4GHz, 16GB ram, OS 1TB NVMe,
Intel Arc A310 ELF, Storage: TrueNas Scale 21TiB (Samba shares)