Issues Connecting to Server

[stucklucky]

I get a permission denied message when I try to navigate to /etc/jellyfin. This is the permissions for the /etc/jellyfin folder:

Code:

ls -ld /etc/jellyfin
drwxr-x--- 3 jellyfin adm 4096 Feb  6 22:12 /etc/jellyfin

What should I do?

[TheDreadPirate]

Jellyfin owns that folder and you aren't in the adm group

Code:

sudo su

That will switch you to root and you can navigate into that folder.

[stucklucky]

Here is the contents of network.xml https://sourceb.in/tZRQtlEvF3

[TheDreadPirate]

What is the output of this command?

Code:

sudo ifconfig

If there is an IPv6 address, censor that before sharing.

[stucklucky]

enp0s31f6: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
       ether [censored by TDP]  txqueuelen 1000  (Ethernet)
       RX packets 0  bytes 0 (0.0 B)
       RX errors 0  dropped 0  overruns 0  frame 0
       TX packets 0  bytes 0 (0.0 B)
       TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
       device interrupt 16  memory 0xdf400000-df420000   

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
       inet 127.0.0.1  netmask 255.0.0.0
       inet6 ::1  prefixlen 128  scopeid 0x10<host>
       loop  txqueuelen 1000  (Local Loopback)
       RX packets 414542  bytes 21391002 (20.4 MiB)
       RX errors 0  dropped 0  overruns 0  frame 0
       TX packets 414542  bytes 21391002 (20.4 MiB)
       TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

wlp3s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
       inet 192.168.1.173  netmask 255.255.255.0  broadcast 192.168.1.255
       inet6 [censored by TDP]  prefixlen 128  scopeid 0x0<global>
       inet6 fe80::b5e1:9a79:240b:f7d6  prefixlen 64  scopeid 0x20<link>
       inet6 [censored by TDP]  prefixlen 64  scopeid 0x0<global>
       ether [censored by TDP]  txqueuelen 1000  (Ethernet)
       RX packets 17112384  bytes 2026469165 (1.8 GiB)
       RX errors 0  dropped 24  overruns 0  frame 0
       TX packets 981518  bytes 138362914 (131.9 MiB)
       TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

[TheDreadPirate]

Try setting the network binding address to 192.168.1.173.

Dashboard > Network

[stucklucky]

Okay I went to Dashboard > Network > Bind to local network address and set it to 192.168.1.173 still no luck. I can't connect manually or using auto connect

[TheDreadPirate]

This is going to sound stupid. Can you try rebooting your router? Nothing about your problem makes sense.

[stucklucky]

I tried rebooting with no success. It doesn't sound so stupid because I actually started having these issues when I moved in to my current home. I haven't been able to use jellyfin in my new home . I was thinking it might be the hardware but we have the same provider and same modem and router. So at this point I'm not sure what else to do.

[TheDreadPirate]

Is the TV far away from the router? Another user had inexplicable connection issues after moving to a new home. Turns out that the problem client had marginal WIFI signal. They relocated the router closer and the problem went away. Is that the case here?