2023-11-17, 05:21 PM
(2023-11-17, 05:04 PM)tmsrxzar Wrote: i am guessing you are new to linux
the 'path to your new drive' would be the 'mount path', the device tree path /dev/sdd* is not a mount path (it's a device tree)
if not already done make sure there is an fstab entry for the new drive, best practice is to mount by uuid so that device tree identifiers changing do not alter mounts - https://www.cyberciti.biz/faq/linux-find...date-fstab
once you have it auto mounting to a location (mount -a or restart), typically to a path under /mnt/, then you can add that path to Jellyfin
from what i am gathering you are just opening the file explorer and now see your drive, this is not the proper way to set up a mount
You beat me to it.
Definitely this. I mount my 3 hard drives to /media/<arbitrary_name>. Just don't mount them to your home directory.
Jellyfin 10.9.11
Ubuntu 24.04 LTS (bare metal)
Intel i3 12100 on Asus Prime H610M-E D4 mATX
32GB DDR4-3600
Intel Arc A380
OS drive - SK Hynix P41 1TB
Storage
WD Green 3TB (Samba shares)
WD Red 3TB CMR (WIP Media, Test libraries)
3x WD Red Pro 6TB CMR in RAIDZ1 (JF Library)
Fractal Meshify 2
Corsair CX430
Ubuntu 24.04 LTS (bare metal)
Intel i3 12100 on Asus Prime H610M-E D4 mATX
32GB DDR4-3600
Intel Arc A380
OS drive - SK Hynix P41 1TB
Storage
WD Green 3TB (Samba shares)
WD Red 3TB CMR (WIP Media, Test libraries)
3x WD Red Pro 6TB CMR in RAIDZ1 (JF Library)
Fractal Meshify 2
Corsair CX430