2024-01-04, 12:41 AM
(This post was last modified: 2024-01-04, 12:47 AM by Efficient_Good_5784. Edited 3 times in total.)
I also have a DS920+. You should enable all decoding options except for AV1 (the only unsupported decode option Jellyfin presents here with the J4125's Quick Sync support).
Since all but one of the decoding options are supported by your NAS's CPU, something is off with your setup.
There should be two reasons why you can't play videos anymore:
If 1, uncheck the AV1 checkbox for HWA settings. This will make your server use the CPU to transcode AV1 files instead of failing with the iGPU.
If 2, either add the video device to your container, or turn off the HWA to exclusively transcode with the CPU.
Since all but one of the decoding options are supported by your NAS's CPU, something is off with your setup.
There should be two reasons why you can't play videos anymore:
- All your videos are encoded in AV1.
- You need to give the container running Jellyfin access to the video device from the CPU.
If 1, uncheck the AV1 checkbox for HWA settings. This will make your server use the CPU to transcode AV1 files instead of failing with the iGPU.
If 2, either add the video device to your container, or turn off the HWA to exclusively transcode with the CPU.