2024-03-08, 07:30 PM
I don't have a good reason for using binhex's image beyond the other images like radarr & sonarr working... I'm using unraid 6.12.6 and the latest jellyfin app for roku (need to double check I'm not somehow using an older version.)
For transcoding settings, I probably do have them setup incorrectly since my J4125B is a relatively cheap motherboard. For example I found this quicksync guide and after adding a new variable it still seems to just direct play.
From the specs on asrock's page for my mobo:
So I enabled what I thought should be enabled and screenshotted my settings pane.
For transcoding settings, I probably do have them setup incorrectly since my J4125B is a relatively cheap motherboard. For example I found this quicksync guide and after adding a new
Code:
/dev/dri
From the specs on asrock's page for my mobo:
Code:
- Integrated Intel® UHD Graphics 600: 12 EUs inside (Up to 750MHz)
- DX12, OpenGL 4.4, OGL ES 3.1, OpenCL 1.2
- HW Acceleration Decode: HEVC (H.265) 8 bit, HEVC (H.265)10 bit, H.264 @ Lvl5.2 (AVC), JPEG/MJPEG, VP8, VP9 8bit, VP9 10 bit
- HW Acceleration Encode: HEVC (H.265) 8 bit, HEVC (H.265)10 bit, H.264 @ Lvl5.2 (AVC), JPEG/MJPEG, VP8, VP9 8bit
- Supports HDMI with max. resolution up to 4K x 2K (4096x2160) @ 30Hz
- Supports D-Sub with max. resolution up to 2048x1536 @ 60Hz
- Supports Auto Lip Sync, xvYCC and HBR (High Bit Rate Audio) with HDMI Port (Compliant HDMI monitor is required)
- Supports HDCP 2.2 with HDMI Port
- Supports Full HD 1080p Blu-ray (BD) playback with HDMI Port
So I enabled what I thought should be enabled and screenshotted my settings pane.